Högskolan Dalarnas logga och länk till högskolans webbplats

du.sePublikationer
Ändra sökning
Länk till posten
Permanent länk

Direktlänk
Johansson, Roger
Publikationer (7 of 7) Visa alla publikationer
Johansson, R. (2020). Understanding the product: Backtracking the QFD connections via the product structure. In: Mortensen, N.H.; Hansen, C.T. and Deininger, M. (Ed.), DS 101: Proceedings of NordDesign 2020, Lyngby, Denmark, 12th - 14th August 2020: Balancing Innovation and operation. Paper presented at NordDesign 2020, Lyngby, Denmark, 12th - 14th August 2020 Balancing Innovation and operation. The Design Society
Öppna denna publikation i ny flik eller fönster >>Understanding the product: Backtracking the QFD connections via the product structure
2020 (Engelska)Ingår i: DS 101: Proceedings of NordDesign 2020, Lyngby, Denmark, 12th - 14th August 2020: Balancing Innovation and operation / [ed] Mortensen, N.H.; Hansen, C.T. and Deininger, M., The Design Society, 2020Konferensbidrag, Publicerat paper (Refereegranskat)
Abstract [en]

The subjectivity involved when creating a Quality Function Deployment (QFD) and the need for companies to understand how their product is fulfilling the customer needs are the focus of this paper. Literature is pointing out the subjectivity when using QFD. Therefore, a method was developed and explored with the aim to try to backtrack and verify the QFD connections via the product structure and thereby reduce the uncertainty. The method calculates a connection strength value for the QFD by summoning connection strength values for three matrices: customer requirements to functions, the functions to technical solutions and technical solutions to product properties. The model was implemented in a relation database and tested using a simple product. The test shows some promising results but also shows sources to uncertainty. Some identified reason for uncertainty were for instance unbalanced matrices, difficult estimates of ratios and redundancy in matrices. The test shows that by working with the model and try to understand why the model gives different results than the QFD gives a better understanding of the product.

Ort, förlag, år, upplaga, sidor
The Design Society, 2020
Serie
NordDESIGN
Nyckelord
QFD, Integrated Product Development, Decision Making
Nationell ämneskategori
Annan maskinteknik
Forskningsämne
Forskningsprofiler 2009-2020, Stålformning och ytteknik
Identifikatorer
urn:nbn:se:du-34777 (URN)10.35199/NORDDESIGN2020.14 (DOI)2-s2.0-85094647384 (Scopus ID)9781912254088 (ISBN)
Konferens
NordDesign 2020, Lyngby, Denmark, 12th - 14th August 2020 Balancing Innovation and operation
Tillgänglig från: 2020-08-19 Skapad: 2020-08-19 Senast uppdaterad: 2021-11-12Bibliografiskt granskad
Johansson, R. (2002). Implementation of Flexible Automatic Assembly in Small Companies: Flexibility and Process demands. (Doctoral dissertation). Stockholm: Industriell produktion
Öppna denna publikation i ny flik eller fönster >>Implementation of Flexible Automatic Assembly in Small Companies: Flexibility and Process demands
2002 (Engelska)Doktorsavhandling, monografi (Övrigt vetenskapligt)
Abstract [en]

This thesis has its focus within Flexible Automatic Assembly (FAA) systems and its implementation in small companies. The small companies are an important part of a country’s industry and economy. The need for the small company to increase the technology level, in order to be competitive in a global market as a supplier, is evident. The prevailing competence and economical resources of most small companies are often limited, a fact which underlines the need for economical, technological and application flexibility for their assembly system solutions. Therefore, these needs could be viewed as the main objectives posed on solutions which claim to be flexible, such as FAA systems.

The objectives for this thesis are:

- to investigate the state-of-the-art in FAA systems; the primary focus of the investigation residing upon flexibility issues. Theoretical study.

- to investigate the implementation process in a small company that tries to apply FAA technology, and observe the problems that must be solved. Empirical study.

- propose an approach as to how FAA systems should be structured.

As a prerequisite for the proposed structure, the state of the art within FAA systems is discussed with focus on flexibility. The work in this thesis is based on the hypothesis that if systems are developed with properties satisfying the SME needs, the FAA-systems would be user-friendlier both in an economical- and a competence perspective. Hence the need to evaluate the status of current FAA systems.

The work attempts to illustrate, through the theoretical and empirical studies, that there are three main factors that limit success when implementing FAA systems in small companies: Competence acquisition, Product design and Strategy for implementation. Learning, or competence acquisition, is most often carried out in parallel with the actual use of the system. This extensive learning phase most often leads to the system becoming obsolete during its expected run-time (period of use). The product design is another area of interest as it often seems hard to motivate product changes to facilitate automatic assembly, especially if no system is at hand as a driving force. The work also showed that there is a lack of strategy for implementation of FAA. The understanding of the FAA system impact on the product development and manufacturing is not understood, thus, the implementation is treated as a local phenomenon in the assembly shop. Furthermore, the ii uncertainty concerning future development of products is reflected in short payoff times, which makes the economical justification of systems difficult.

All of these factors have been misrepresented to date due to a loose application of the term flexibility, and its implications. Therefore, the work attempts to clarify the flexibility issues, in terms of the assembly process demands, and also proposes a new flexibility map.

To facilitate implementation of FAA into small companies, a modular assembly system approach is proposed. The modules should be task oriented. By using a modular approach, the possibility to have a system that is easy to keep up to date with product development, is greatly improved and the risk to invest in dead ends will decrease. Furthermore, it should become simpler to find an optimal level of automation or to prioritise the flexibility efforts, and thereby reduce the cost for maintaining flexibility over the system lifespan.

A way to develop a decision.making tool for prioritising the flexibility efforts is proposed by using a Penalty-of-Change curve, which exploits the proposed flexibility map as a base. The modular approach is a way to decrease the negative correlation between dynamic flexibility (on-line) and static flexibility (off-line), since too much dynamic flexibility otherwise tends to limit the possibility to change the system to new situations. The modular approach isolates this negative correlation within modules. The technological adaptability will increase if a modular system is used since the standardised interfaces between modules define clear borders between functions or tasks within a system. Furthermore, a modular approach facilitates stepwise knowledge acquisition since it will be natural to focus on modules instead of entire systems.

A leading idea in this thesis is, that small and large companies have the same system demands at module level, which makes it possible to increase the market for standardised modules and thereby decrease the cost for such modules. In other words, standardised modules, instead of systems. Modular systems are not optimised in terms of a low cost/capacity ratio for a certain product generation, instead, the system is optimised towards, reconfigurability to be able to follow product evolution, or totally rebuild for new products. Which, in the long run, may lead to a low cost/capacity ratio. Therefore, a prerequisite for the use of modular systems is that the systems will operate in a frequently changing market where fast ramp-up are more important (to maintain the market share) than an optimised system for each product generation.

Ort, förlag, år, upplaga, sidor
Stockholm: Industriell produktion, 2002. s. x, 170
Serie
TRITA-IIP-02-07, ISSN 1650-1888
Nyckelord
Assembly automation, Flexibility, Modularity
Nationell ämneskategori
Maskinteknik
Identifikatorer
urn:nbn:se:du-34783 (URN)
Disputation
2002-06-07, 00:00
Anmärkning

NR 20140805

Tillgänglig från: 2020-08-20 Skapad: 2020-08-20 Senast uppdaterad: 2020-08-20Bibliografiskt granskad
Johansson, R. & Erixon, G. (2002). Modular FAA-SYSTEMS: A way to facilitate justification and implementation of FAA into small and middle sized companies. In: : . Paper presented at The 2002 International conference on Industry, Engineering and Management Systems (IEMS), Cocoa Beach, Florida, USA.
Öppna denna publikation i ny flik eller fönster >>Modular FAA-SYSTEMS: A way to facilitate justification and implementation of FAA into small and middle sized companies
2002 (Engelska)Konferensbidrag, Publicerat paper (Övrigt vetenskapligt)
Abstract [en]

Small companies are the backbone of any nations industry and they are often sub contractors to major corporations, which set higher and higher demands on them. In order to survive they will inevitably be obliged to comply with the requirements [Onori et al., 2000]. In order to do so, one step is to increase their technology level. Therefore, this paper focuses on modular FAA in order to facilitate the implementation of FAA-systems into small companies. How well companies succeed in the implementation of a new technology in manufacturing depends largely on how well they understand the dependency between products and processes. Is it the right technology for the companies manufacturing system? What has to be done to the products in order to use this technology? A paradox is that new technology in manufacturing can often be justified only when a new product launch is planned. This is probably true also in the case of Flexible Automatic Assembly Systems (FAA) where the possibilities to introduce a well functioning system to use with existing products are very limited.

Nationell ämneskategori
Produktionsteknik, arbetsvetenskap och ergonomi
Identifikatorer
urn:nbn:se:du-34778 (URN)
Konferens
The 2002 International conference on Industry, Engineering and Management Systems (IEMS), Cocoa Beach, Florida, USA
Tillgänglig från: 2020-08-19 Skapad: 2020-08-19 Senast uppdaterad: 2020-08-20Bibliografiskt granskad
Johansson, R. & Erixon, G. (2001). Assessing Flexibility: The Frequency and Horizon Approach. In: : . Paper presented at FAIM 2001, 11th International Conference on Flexible Automation and Intelligent Manufacturing, Dublin, Ireland.
Öppna denna publikation i ny flik eller fönster >>Assessing Flexibility: The Frequency and Horizon Approach
2001 (Engelska)Konferensbidrag, Publicerat paper (Övrigt vetenskapligt)
Abstract [en]

This paper focuses on flexibility in the area of flexible automatic assembly systems. Far-reaching research has been done in effort to develop flexible automatic assembly systems. A dilemma that appears in understanding the focus for these research projects is the immense amounts of flexibility concepts used. This paper proposes a structure for the concepts based on frequency and horizon for different events in an assembly system. The results are presented in a proposed “flexibility map”. Based on the “frequency and horizon approach” and the definition of flexibility as “the penalty of change” [1], an argumentation concerning what kind of flexibility is most valuable in an assembly system can be discussed. The paper also points out the demands for a flexibility that allows for de-coupling of high and low frequency events in a system. A clear distinction is made between dynamic flexibility and static flexibility. It is a well-known fact that the increase of the dynamic flexibility in an assembly system will decrease the static flexibility [2]. The paper ends with a proposal for decreasing the negative correlation between dynamic- and static flexibility. An objective for further research concerning whether a certain process within an assembly system affects certain flexibility is also presented.

Nationell ämneskategori
Produktionsteknik, arbetsvetenskap och ergonomi
Identifikatorer
urn:nbn:se:du-34779 (URN)
Konferens
FAIM 2001, 11th International Conference on Flexible Automation and Intelligent Manufacturing, Dublin, Ireland
Tillgänglig från: 2020-08-19 Skapad: 2020-08-19 Senast uppdaterad: 2020-08-20Bibliografiskt granskad
Onori, M., Alsterman, A., Johansson, R. & Bergdahl, A. (2000). Hyper Flexible Automatic Assembly: Needs and Possibilities with Standard Assembly Solutions. In: : . Paper presented at The ISR2000, 31st International Symposium on Industrial Robots (ISR).
Öppna denna publikation i ny flik eller fönster >>Hyper Flexible Automatic Assembly: Needs and Possibilities with Standard Assembly Solutions
2000 (Engelska)Konferensbidrag, Muntlig presentation med publicerat abstract (Refereegranskat)
Nationell ämneskategori
Produktionsteknik, arbetsvetenskap och ergonomi
Identifikatorer
urn:nbn:se:du-34781 (URN)
Konferens
The ISR2000, 31st International Symposium on Industrial Robots (ISR)
Tillgänglig från: 2020-08-20 Skapad: 2020-08-20 Senast uppdaterad: 2020-08-20Bibliografiskt granskad
Byron Carlsson, T., Eskilander, S., Johansson, R. & Peterson, P. (1998). A Flowchart Method for Design For Automatic Assembly. In: International Forum on DFMA: . Paper presented at 1998 International Forum on Design for Manufacture and Assembly (DFMA), Newport, Rhode Island USA, June 8-9, 1998.
Öppna denna publikation i ny flik eller fönster >>A Flowchart Method for Design For Automatic Assembly
1998 (Engelska)Ingår i: International Forum on DFMA, 1998Konferensbidrag, Publicerat paper (Övrigt vetenskapligt)
Nationell ämneskategori
Produktionsteknik, arbetsvetenskap och ergonomi
Identifikatorer
urn:nbn:se:du-34782 (URN)
Konferens
1998 International Forum on Design for Manufacture and Assembly (DFMA), Newport, Rhode Island USA, June 8-9, 1998
Tillgänglig från: 2020-08-20 Skapad: 2020-08-20 Senast uppdaterad: 2020-08-20Bibliografiskt granskad
Byron Carlsson, T., Eskilander, S., Johansson, R. & Peterson, P. (1998). A structured set of concrete rules for design for automatic assembly. In: : . Paper presented at International Symposium on Automotive Technology and Automation, June 2-5 , 1998, Dusseldorf, Germany.
Öppna denna publikation i ny flik eller fönster >>A structured set of concrete rules for design for automatic assembly
1998 (Engelska)Konferensbidrag, Publicerat paper (Övrigt vetenskapligt)
Nationell ämneskategori
Produktionsteknik, arbetsvetenskap och ergonomi
Identifikatorer
urn:nbn:se:du-34784 (URN)
Konferens
International Symposium on Automotive Technology and Automation, June 2-5 , 1998, Dusseldorf, Germany
Tillgänglig från: 2020-08-20 Skapad: 2020-08-20 Senast uppdaterad: 2020-08-20Bibliografiskt granskad
Organisationer

Sök vidare i DiVA

Visa alla publikationer