du.sePublikasjoner
Endre søk
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • chicago-author-date
  • chicago-note-bibliography
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Dishwasher and washing machine heated by a hot water circulation loop
Högskolan Dalarna, Akademin Industri och samhälle, Energi och miljöteknik.
2007 (svensk)Inngår i: Applied Thermal Engineering, ISSN 1359-4311, E-ISSN 1873-5606, Vol. 27, nr 1, s. 120-128Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

Electric energy (70-90%) used by electrically heated dishwashers and washing machines is used for heating the water, the crockery, the laundry and the machine and could as well be replaced by heat from other sources than electricity. This article evaluates prototypes of a dishwasher and a washing machine, where the machines are heated by a hot water circulation loop and the heat is transferred to the machines via a heat exchanger. The machine therefore uses water from the cold water pipe. Measurements and simulations have been performed showing that all energy for heating can be replaced if the supply water temperature is 65-70 degrees C. An alternative and common way to save electricity is to connect the machines to the domestic hot water pipe, but the electrical savings with this measure are much smaller, especially for the dishwasher. Computer modelling has been performed and the model has proved to have a high agreement with measured data. However comparison with manufacturers' data indicates that the computer models overestimate the energy demand by about 10 %.

sted, utgiver, år, opplag, sider
2007. Vol. 27, nr 1, s. 120-128
Emneord [en]
dishwasher, clothes washer, washing machine, domestic appliances, heat exchanger
HSV kategori
Identifikatorer
URN: urn:nbn:se:du-12893DOI: 10.1016/j.applthermaleng.2006.05.005ISI: 000241569000014OAI: oai:DiVA.org:du-12893DiVA, id: diva2:645044
Tilgjengelig fra: 2013-09-03 Laget: 2013-09-03 Sist oppdatert: 2017-12-06bibliografisk kontrollert
Inngår i avhandling
1. Combined solar and pellet heating systems for single-family houses: How to achieve decreased electricity usage, increased system efficiency and increased solar gains
Åpne denne publikasjonen i ny fane eller vindu >>Combined solar and pellet heating systems for single-family houses: How to achieve decreased electricity usage, increased system efficiency and increased solar gains
2006 (engelsk)Doktoravhandling, med artikler (Annet vitenskapelig)
Abstract [en]

In Sweden, there are about 0.5 million single-family houses that are heated by electricity alone, and rising electricity costs force the conversion to other heating sources such as heat pumps and wood pellet heating systems. Pellet heating systems for single-family houses are currently a strongly growing market. Future lack of wood fuels is possible even in Sweden, and combining wood pellet heating with solar heating will help to save the bio-fuel resources. The objectives of this thesis are to investigate how the electrically heated single-family houses can be converted to pellet and solar heating systems, and how the annual efficiency and solar gains can be increased in such systems. The possible reduction of CO-emissions by combining pellet heating with solar heating has also been investigated. Systems with pellet stoves (both with and without a water jacket), pellet boilers and solar heating have been simulated. Different system concepts have been compared in order to investigate the most promising solutions. Modifications in system design and control strategies have been carried out in order to increase the system efficiency and the solar gains. Possibilities for increasing the solar gains have been limited to investigation of DHW-units for hot water production and the use of hot water for heating of dishwashers and washing machines via a heat exchanger instead of electricity (heat-fed appliances). Computer models of pellet stoves, boilers, DHW-units and heat-fed appliances have been developed and the parameters for the models have been identified from measurements on real components. The conformity between the models and the measurements has been checked. The systems with wood pellet stoves have been simulated in three different multi-zone buildings, simulated in detail with heat distribution through door openings between the zones. For the other simulations, either a single-zone house model or a load file has been used. Simulations were carried out for Stockholm, Sweden, but for the simulations with heat-fed machines also for Miami, USA. The foremost result of this thesis is the increased understanding of the dynamic operation of combined pellet and solar heating systems for single-family houses. The results show that electricity savings and annual system efficiency is strongly affected by the system design and the control strategy. Large reductions in pellet consumption are possible by combining pellet boilers with solar heating (a reduction larger than the solar gains if the system is properly designed). In addition, large reductions in carbon monoxide emissions are possible. To achieve these reductions it is required that the hot water production and the connection of the radiator circuit is moved to a well insulated, solar heated buffer store so that the boiler can be turned off during the periods when the solar collectors cover the heating demand. The amount of electricity replaced using systems with pellet stoves is very dependant on the house plan, the system design, if internal doors are open or closed and the comfort requirements. Proper system design and control strategies are crucial to obtain high electricity savings and high comfort with pellet stove systems. The investigated technologies for increasing the solar gains (DHW-units and heat-fed appliances) significantly increase the solar gains, but for the heat-fed appliances the market introduction is difficult due to the limited financial savings and the need for a new heat distribution system. The applications closest to market introduction could be for communal laundries and for use in sunny climates where the dominating part of the heat can be covered by solar heating. The DHW-unit is economical but competes with the internal finned-tube heat exchanger which is the totally dominating technology for hot water preparation in solar combisystems for single-family houses.

sted, utgiver, år, opplag, sider
Stockholm: Department of Energy and Environmental Technology, KTH - Royal Institute of Technology, 2006
Emneord
Pellet, pelleteldning, kamin, panna, solvärmesystem, varmvattenberedning, systemutformning, småhus, elbesparing, verkningsgrad, emissioner, rökgasförluster, skorstensförlust, diskmaskin, tvättmaskin
HSV kategori
Identifikatorer
urn:nbn:se:du-2405 (URN)
Disputas
2006-12-13, Sal M3, KTH, Brinellvägen 64, Stockholm, 10:00
Opponent
Veileder
Tilgjengelig fra: 2006-12-05 Laget: 2006-12-05 Sist oppdatert: 2013-09-03bibliografisk kontrollert

Open Access i DiVA

Fulltekst mangler i DiVA

Andre lenker

Forlagets fulltekst

Søk i DiVA

Av forfatter/redaktør
Persson, Tomas
Av organisasjonen
I samme tidsskrift
Applied Thermal Engineering

Søk utenfor DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetric

doi
urn-nbn
Totalt: 643 treff
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • chicago-author-date
  • chicago-note-bibliography
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf