du.sePublikasjoner
Endre søk
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • chicago-author-date
  • chicago-note-bibliography
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Modeling microstructure evolution in a martensitic stainless steel subjected to hot working using a physically based model
Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik. KTH Royal Institute of Technology.ORCID-id: 0000-0002-3812-5285
Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
KTH Royal Institute of Technology.
2019 (engelsk)Inngår i: Metallurgical and Materials Transactions. A, ISSN 1073-5623, E-ISSN 1543-1940, Vol. 50, nr 3, s. 1480-1488Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

The microstructure evolution of a martensitic Stainless steel subjected to hot compression is simulated with a physically based model. The model is based on coupled sets of evolution equations for dislocations, vacancies, recrystallization and grain growth. The advantage of this model is that with only a few experiments, the material dependent parameters of the model can be calibrated and used for a new alloy in any deformation condition. The experimental data of this work is obtained from a series of hot compression, and subsequent stress relaxation tests performed in a Gleeble thermo-mechanical simulator. These tests are carried out at various temperatures ranging from 900 to 1200⁰C, strains up to 0.7 and strain rates of 0.01, 1 and 10 s-1. The grain growth, flow stress, and stress relaxations are simulated by finding reasonable values for model parameters. The flow stress data obtained at the strain rate of 10 s-1 were used to calibrate the model parameters and the predictions of the model for the lower strain rates were quite satisfactory. An assumption in the model is that the structure of second phase particles does not change during the short time of deformation. The results show a satisfactory agreement between the experimental data and simulated flow stress, as well as less than 5% difference for grain growth simulations and predicting the dominant softening mechanisms during stress relaxation according to the strain rates and temperatures under deformation.

sted, utgiver, år, opplag, sider
2019. Vol. 50, nr 3, s. 1480-1488
Emneord [en]
Modeling, Dislocation density, Flow Stress, Grain Growth, Recrystallization, Hot Compression, Martensitic Stainless Steel
HSV kategori
Forskningsprogram
Stålformning och ytteknik
Identifikatorer
URN: urn:nbn:se:du-29041DOI: 10.1007/s11661-018-5073-6ISI: 000457551800036Scopus ID: 2-s2.0-85058849719OAI: oai:DiVA.org:du-29041DiVA, id: diva2:1269459
Tilgjengelig fra: 2018-12-10 Laget: 2018-12-10 Sist oppdatert: 2019-03-05bibliografisk kontrollert

Open Access i DiVA

fulltext(1535 kB)50 nedlastinger
Filinformasjon
Fil FULLTEXT02.pdfFilstørrelse 1535 kBChecksum SHA-512
de469d75efba02826c2f671720cea96fb636e598cabb7b688ce4ec8e3243dbf79ca5835e6305373ccae815fe33e7bedd02b3720a672ed419232f27482c9755ca
Type fulltextMimetype application/pdf

Andre lenker

Forlagets fulltekstScopus

Personposter BETA

Safara Nosar, NimaEngberg, Göran

Søk i DiVA

Av forfatter/redaktør
Safara Nosar, NimaEngberg, Göran
Av organisasjonen
I samme tidsskrift
Metallurgical and Materials Transactions. A

Søk utenfor DiVA

GoogleGoogle Scholar
Totalt: 63 nedlastinger
Antall nedlastinger er summen av alle nedlastinger av alle fulltekster. Det kan for eksempel være tidligere versjoner som er ikke lenger tilgjengelige

doi
urn-nbn

Altmetric

doi
urn-nbn
Totalt: 130 treff
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • chicago-author-date
  • chicago-note-bibliography
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf