du.sePublikasjoner
Endre søk
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • chicago-author-date
  • chicago-note-bibliography
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Wear of PM HIP Metal Matrix Composites - Influence of Carbide Type
Sandvik Powder Solutions.
Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
2019 (engelsk)Inngår i: HOT ISOSTATIC PRESSING, HIP' 17 / [ed] Dayal, P Triani, G, MATERIALS RESEARCH FORUM LLC , 2019, s. 142-148Konferansepaper, Publicerat paper (Fagfellevurdert)
Abstract [en]

The type of hard phase in combination with matrix material has a great influence on the wear properties of PM HIP Metal Matrix Composites. The hardness and toughness of the hard phase as well as its reaction with the matrix in combination with wear mechanism can cause significant differences in performance of the material. Three materials with the same matrix alloy but different carbide types have been studied with regards to tribological behavior in low stress and high stress abrasion as well as scratch testing against a quartz stylus. In low stress abrasion testing the materials has only very small differences in the performance between the materials. The materials containing crushed or spherical fused tungsten carbide had a higher initial wear rate compared to the material with macrocrystalline carbide. This can be explained by the higher degree of carbide dissolution in these materials. In the later stages of wear the three materials have similar performance. In the scratch testing a clear difference can be observed between the materials. The material containing the fused tungsten carbide exhibits a higher degree of carbide damage at the exit side of the wear scar sliding over the carbide. This can be attributed to the much higher degree of carbide dissolution in the fused carbide compared to the MC carbide. The results from tribology testing are discussed and compared to wear mechanisms observed in parts that have been in service in a slurry pump and a crusher.

sted, utgiver, år, opplag, sider
MATERIALS RESEARCH FORUM LLC , 2019. s. 142-148
Serie
Materials Research Proceedings, ISSN 2474-395X ; 10
Emneord [en]
HIP, Wear, Tribology, Metal Matrix Composites, MMC, Wear Resistant
HSV kategori
Forskningsprogram
Stålformning och ytteknik
Identifikatorer
URN: urn:nbn:se:du-30054DOI: 10.21741/9781644900031-20ISI: 000466052400020ISBN: 978-1-64490-002-4 (tryckt)OAI: oai:DiVA.org:du-30054DiVA, id: diva2:1316415
Konferanse
12th International Conference on Hot Isostatic Pressing (HIP '17), DEC 5-8, 2017, Sydney, AUSTRALIA
Tilgjengelig fra: 2019-05-17 Laget: 2019-05-17 Sist oppdatert: 2019-05-17bibliografisk kontrollert

Open Access i DiVA

fulltext(1803 kB)31 nedlastinger
Filinformasjon
Fil FULLTEXT01.pdfFilstørrelse 1803 kBChecksum SHA-512
5827117c563935f17f1cf44aa321170da099ead1f8c4e6057aa605927335534f7e6e482f7d3518f818b37bc2afcb4e74b261bc79ca0ab570bfac1744579546a0
Type fulltextMimetype application/pdf

Andre lenker

Forlagets fulltekst

Personposter BETA

Hall, Josefine

Søk i DiVA

Av forfatter/redaktør
Hall, Josefine
Av organisasjonen

Søk utenfor DiVA

GoogleGoogle Scholar
Totalt: 31 nedlastinger
Antall nedlastinger er summen av alle nedlastinger av alle fulltekster. Det kan for eksempel være tidligere versjoner som er ikke lenger tilgjengelige

doi
isbn
urn-nbn

Altmetric

doi
isbn
urn-nbn
Totalt: 98 treff
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • chicago-author-date
  • chicago-note-bibliography
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf