du.sePublikationer
Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • chicago-author-date
  • chicago-note-bibliography
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Energy Analysis within Industrial Hydraulics and Correspondent Solar PV System Design
Högskolan Dalarna, Akademin Industri och samhälle, Maskinteknik.
2010 (Engelska)Självständigt arbete på avancerad nivå (masterexamen)Studentuppsats (Examensarbete)
Abstract [en]

Energy efficiency and renewable energy use are two main priorities leading to industrial sustainability nowadays according to European Steel Technology Platform (ESTP). Modernization efforts can be done by industries to improve energy consumptions of the production lines. These days, steel making industrial applications are energy and emission intensive. It was estimated that over the past years, energy consumption and corresponding CO2 generation has increased steadily reaching approximately 338.15 parts per million in august 2010 [1]. These kinds of facts and statistics have introduced a lot of room for improvement in energy efficiency for industrial applications through modernization and use of renewable energy sources such as solar Photovoltaic Systems (PV).The purpose of this thesis work is to make a preliminary design and simulation of the solar photovoltaic system which would attempt to cover the energy demand of the initial part of the pickling line hydraulic system at the SSAB steel plant. For this purpose, the energy consumptions of this hydraulic system would be studied and evaluated and a general analysis of the hydraulic and control components performance would be done which would yield a proper set of guidelines contributing towards future energy savings. The results of the energy efficiency analysis showed that the initial part of the pickling line hydraulic system worked with a low efficiency of 3.3%. Results of general analysis showed that hydraulic accumulators of 650 liter size should be used by the initial part pickling line system in combination with a one pump delivery of 100 l/min. Based on this, one PV system can deliver energy to an AC motor-pump set covering 17.6% of total energy and another PV system can supply a DC hydraulic pump substituting 26.7% of the demand. The first system used 290 m2 area of the roof and was sized as 40 kWp, the second used 109 m2 and was sized as 15.2 kWp. It was concluded that the reason for the low efficiency was the oversized design of the system. Incremental modernization efforts could help to improve the hydraulic system energy efficiency and make the design of the solar photovoltaic system realistically possible. Two types of PV systems where analyzed in the thesis work. A method was found calculating the load simulation sequence based on the energy efficiency studies to help in the PV system simulations. Hydraulic accumulators integrated into the pickling line worked as energy storage when being charged by the PV system as well.

Ort, förlag, år, upplaga, sidor
Borlänge, 2010. , s. 156
Nyckelord [en]
Photovoltaic system, solar energy, energy efficiency, energy storage, Matlab, PVSYST, steel, pickling line, industrial emissions, environmental visions, pressure measurements, hydraulic system, electrical motors, hydraulic accumulators, variable speed drives, programmable valves, Projekt Hydraulik AB, HYDAC Fluidteknik AB, SSAB Tunnplåt AB
Identifikatorer
URN: urn:nbn:se:du-5099OAI: oai:dalea.du.se:5099DiVA, id: diva2:518961
Uppsök
teknik
Handledare
Tillgänglig från: 2010-11-29 Skapad: 2010-11-29 Senast uppdaterad: 2012-04-24Bibliografiskt granskad

Open Access i DiVA

fulltext(10152 kB)3578 nedladdningar
Filinformation
Filnamn FULLTEXT01.pdfFilstorlek 10152 kBChecksumma SHA-512
fec7d142114e7e47b13e99784287ad59b935ed303d4d433228ab113763f6dc313d48a0f5c132b37d485e5d0ad31a976ebd97a17a566b0728263045c46c2adb2e
Typ fulltextMimetyp application/pdf

Av organisationen
Maskinteknik

Sök vidare utanför DiVA

GoogleGoogle Scholar
Totalt: 3578 nedladdningar
Antalet nedladdningar är summan av nedladdningar för alla fulltexter. Det kan inkludera t.ex tidigare versioner som nu inte längre är tillgängliga.

urn-nbn

Altmetricpoäng

urn-nbn
Totalt: 1313 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • chicago-author-date
  • chicago-note-bibliography
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf