du.sePublikationer
Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • chicago-author-date
  • chicago-note-bibliography
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
A comparative study of the corrosion protective properties of chromium and chromium free passivation methods
Högskolan Dalarna, Akademin Industri och samhälle, Materialvetenskap.
Högskolan Dalarna, Akademin Industri och samhälle, Materialvetenskap.
2007 (Engelska)Ingår i: Surface & Coatings Technology, ISSN 0257-8972, E-ISSN 1879-3347, Vol. 202, nr 2, s. 391-397Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

Commercially available passivation methods for white-rust protection of hot-dip galvanized steel have been investigated. The passivations were either based on trivalent chromium or chromium free. A chromate based conversion coating was used for reference. The treated panels were tested with regard to white rust protection and paintability. The surface chemistry of the conversion coatings was monitored with scanning Auger electron spectroscopy and X-ray photoelectron spectroscopy. Coating thicknesses were measured using Auger electron sputter depth profiling. The passivations were applied with a thickness recommended by the supplier and thus showed large variation. The thickness of the chromium free passivation (Cr-free) is approximately 75 nm. The coating contains the active ions; H3O+, Ti4+, Mn2+, Zn2+, PO4 3-. The passivation based on trivalent chromium (Cr-III) is approximately 30 nm thick and contains the active ions; H3O+ Cr3+, PO4 3-, F. The chromate based passivation (Cr- VI) is approximately 5 nm thick and contains the active ions Cr6+/Cr3+, F-. The Cr-free and the Cr-III passivations showed similar white rust protection in the corrosion tests. The corrosion resistance was good although it did not fully reach the level of the Cr-VI passivation. The results from the tests of the painted panels showed that the powder paint worked well on all three passivations. The solvent born paint worked best on the passivation based on trivalent chromium. The water born paint showed poor resistance to blistering in the Cleveland humidity test for all three passivations. In this test the passivation with hexavalent chromium showed slightly better results than the chromate free passivations.

Ort, förlag, år, upplaga, sidor
2007. Vol. 202, nr 2, s. 391-397
Nyckelord [en]
corrosion, galvanized steel, passivation, SAM, XPS
Nationell ämneskategori
Materialteknik
Identifikatorer
URN: urn:nbn:se:du-2977DOI: 10.1016/j.surfcoat.2007.06.001ISI: 000251182600026OAI: oai:dalea.du.se:2977DiVA, id: diva2:519884
Tillgänglig från: 2007-11-09 Skapad: 2007-11-09 Senast uppdaterad: 2017-12-07Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Övriga länkar

Förlagets fulltext

Sök vidare i DiVA

Av författaren/redaktören
Bexell, UlfGrehk, Mikael
Av organisationen
Materialvetenskap
I samma tidskrift
Surface & Coatings Technology
Materialteknik

Sök vidare utanför DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetricpoäng

doi
urn-nbn
Totalt: 1554 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • chicago-author-date
  • chicago-note-bibliography
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf