du.sePublikasjoner
Endre søk
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • chicago-author-date
  • chicago-note-bibliography
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Simulation of the soaking and gas jet cooling in a continuous annealing line using dilatometry
Högskolan Dalarna, Akademin Industri och samhälle, Materialvetenskap.
2010 (engelsk)Inngår i: Steel Research International, ISSN 1611-3683, E-ISSN 1869-344X, Vol. 81, nr 2Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

The present study concerns the simulation of a continuous annealing line (CAL), using dilatometry. Simulations of CAL have been performed on four commercial steel grades with different chemical compositions in order to investigate how the alloying elements C, Mn, Si and B affect the microstructure and hardness of dual phase (DP) and martensitic steels. Three annealing cycles corresponding to those used in a CAL have been applied. When annealing intercritically, as is the case in DP-steel production, the materials do not reach equilibrium during soaking. Mn and C increase the austenite content and consequently the hardness of the materials. Higher levels of Si (0.4?wt %) are required to retard the formation of new ferrite during cooling in the gas jet section, prior to quenching. B increases hardenability effectively when annealing in the austenite region but is not as efficient during intercritical annealing, which implies that boron restrains ferrite nucleation rather than impeding ferrite growth. Results from DICTRA calculations show that it is possible to simulate the phase transformations during soaking, gasjet cooling and quenching.

sted, utgiver, år, opplag, sider
2010. Vol. 81, nr 2
Emneord [en]
dilatometry, simulation, continuous annealing, high strength steels
HSV kategori
Forskningsprogram
Stålformning och ytteknik, Mikrostrukturutveckling i avancerade höghållfasta stål
Identifikatorer
URN: urn:nbn:se:du-4423DOI: 10.1002/srin.200900097OAI: oai:dalea.du.se:4423DiVA, id: diva2:520135
Tilgjengelig fra: 2010-01-13 Laget: 2010-01-13 Sist oppdatert: 2017-12-07bibliografisk kontrollert

Open Access i DiVA

Fulltekst mangler i DiVA

Andre lenker

Forlagets fulltekst

Søk i DiVA

Av forfatter/redaktør
Granbom, Ylva
Av organisasjonen
I samme tidsskrift
Steel Research International

Søk utenfor DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetric

doi
urn-nbn
Totalt: 741 treff
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • chicago-author-date
  • chicago-note-bibliography
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf