Högskolan Dalarnas logga och länk till högskolans webbplats

du.sePublikationer
Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • chicago-author-date
  • chicago-note-bibliography
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Tribological testing of commercial CrN, (Ti,Al)N and CrC/C PVD coatings: evaluation of galling and wear characteristics against different high strength steels
Högskolan Dalarna, Akademin Industri och samhälle, Materialvetenskap.
Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
2011 (Engelska)Ingår i: Surface & Coatings Technology, ISSN 0257-8972, E-ISSN 1879-3347, Vol. 205, nr 16, s. 4045-4051Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

The increasing use of high strength steels in a variety of mechanical engineering applications has illuminated problems associated with galling in sheet metal forming operations. Galling is a tribological phenomenon associated with transfer of material from the steel sheet to the tool surface during forming resulting in seizure of the tool/steel sheet contact and extensive scratching of the steel sheet surface. As a result, a number of concepts have been developed in order to reduce the tendency of galling in sheet metal forming, including the development of new dry lubricants, new forming tool steel grades and improved surface engineering treatments such as the deposition of low friction CVD- and PVD-coatings. In the present study the potential performance of three commercial PVD coatings, including CrN, (Ti,Al)N and a CrC/C DLC-based coating, in the forming of hot and cold rolled high strength steel as well as electro and hot-dip galvanized high strength steel has been evaluated using pin-on-disc testing under lubricated contact conditions. Post-test examination of the tribosurfaces using FEG-SEM and EDS analyses was performed in order to evaluate the mechanisms controlling the tendency to material transfer and wear. The results show that in contact with the hot and cold rolled steel the material pick-up tendency of the PVD coatings tend to increase in the order CrC/C–CrN–(Ti,Al)N while in contact with the two galvanized steel sheets, the CrC/C and the (Ti,Al)N coating show a significantly lower material pick-up tendency as compared with the CrN coating. Further, the substrate hardness has a strong influence on the wear of the PVD coatings and consequently on the friction characteristics and galling tendency of the coating/substrate composite. Low substrate hardness, resulting in a low load bearing capacity, increases the tendency to cracking and subsequently chipping of the brittle coating.

Ort, förlag, år, upplaga, sidor
Lausanne: Elsevier , 2011. Vol. 205, nr 16, s. 4045-4051
Nyckelord [en]
PVD coatings; Tool steel; High strength steel sheet; Galling; Friction; Wear
Nationell ämneskategori
Bearbetnings-, yt- och fogningsteknik
Identifikatorer
URN: urn:nbn:se:du-6234DOI: 10.1016/j.surfcoat.2011.02.053ISI: 000290187700011Scopus ID: 2-s2.0-79953230044OAI: oai:dalea.du.se:6234DiVA, id: diva2:520531
Tillgänglig från: 2012-01-24 Skapad: 2012-01-24 Senast uppdaterad: 2021-06-10Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Övriga länkar

Förlagets fulltextScopus

Sök vidare i DiVA

Av författaren/redaktören
Eriksson, JennyOlsson, Mikael
Av organisationen
MaterialvetenskapMaterialteknik
I samma tidskrift
Surface & Coatings Technology
Bearbetnings-, yt- och fogningsteknik

Sök vidare utanför DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetricpoäng

doi
urn-nbn
Totalt: 1170 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • chicago-author-date
  • chicago-note-bibliography
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf