du.sePublikationer
Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • chicago-author-date
  • chicago-note-bibliography
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
An investigation of worn work roll materials used in the finishing stands of the hot strip mill for steel rolling
Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik. (Tribologi)
Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik. (Tribologi)
2013 (Engelska)Ingår i: Proceedings of the Institution of mechanical engineers. Part J, journal of engineering tribology, ISSN 1350-6501, E-ISSN 2041-305X, Vol. 227, nr 8, s. 837-844Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

The surface failure characteristics of different work roll materials, i.e. High Speed Steel, High Chromium Iron and Indefinite Chill Iron, used in the finishing stands of a hot strip mill have been investigated using stereo microscopy, 3D optical profilometry, scanning electron microscopy and energy dispersive X-ray spectroscopy. The results show that the surface failure mechanisms of work rolls for hot rolling are very complex, involving plastic deformation, abrasive wear, adhesive wear, mechanical and thermal induced cracking, material transfer and oxidation. Despite the differences in chemical composition and microstructure, the tribological response of the different work roll materials was found to be strongly dependent on second phase constituents such as the size, morphology and distribution of different carbide phases and graphite (in the case of Indefinite Chill Iron) which was found to promote cracking. Cracking and chipping of the work roll surfaces, both having a negative impact on work roll wear, are strongly influenced by the presence of carbides, carbide networks and graphite in the work roll surface. Consequently, the amount of carbide forming elements as well as the manufacturing process must be controlled in order to obtain an optimised microstructure and a predictable wear rate.

Ort, förlag, år, upplaga, sidor
Sage Publications, 2013. Vol. 227, nr 8, s. 837-844
Nyckelord [en]
Work rolls, hot strip mill, surface failure, wear, cracking
Nationell ämneskategori
Bearbetnings-, yt- och fogningsteknik
Forskningsämne
Stålformning och ytteknik
Identifikatorer
URN: urn:nbn:se:du-11444DOI: 10.1177/1350650113478333ISI: 000321702800004OAI: oai:DiVA.org:du-11444DiVA, id: diva2:576517
Tillgänglig från: 2012-12-13 Skapad: 2012-12-13 Senast uppdaterad: 2017-12-06Bibliografiskt granskad
Ingår i avhandling
1. Tribology in Metal Working
Öppna denna publikation i ny flik eller fönster >>Tribology in Metal Working
2012 (Engelska)Licentiatavhandling, sammanläggning (Övrigt vetenskapligt)
Abstract [en]

This thesis focuses on the tribological performance of tool surfaces in two steel working operations, namely wire drawing and hot rolling. In all forming operations dimensions and surface finish of the products are of utmost importance. Forming basically includes three parts – forming conditions excluded – that may be changed; work material, tool and (possibly) lubricant. In the interface between work material and tool, the conditions are very aggressive with – generally or locally – high temperatures and pressures. The surfaces will be worn in various ways and this will change the conditions in the process. Consequently, the surface finish as well as the dimensions of the formed product may change and in the end, the product will not fulfil the requirements of the customer. Therefore, research and development in regard to wear, and consequently tribology, of the forming tools is of great interest.

The investigations of wire drawing dies focus on coating adhesion/cohesion, surface characteristics and material transfer onto the coated steel both in laboratory scale as well as in the wire drawing process. Results show that it in wire drawing is possible to enhance the tribological performance of drawing dies by using a lubricant together with a steel substrate coated by a polished, dual-layer coating containing both hard and friction-lowering layers.

The investigations of hot rolling work rolls focus on microstructure and hardness as well as cracking- and surface characteristics in both laboratory scale and in the hot strip mill. Results show that an ideal hot work roll material should be made up of a matrix with high hardness and a large amount of complex, hard carbides evenly distributed in the microstructure. The surface failure mechanisms of work rolls are very complex involving plastic deformation, abrasive wear, adhesive wear, mechanical and thermal induced cracking, material transfer and oxidation.

This knowledge may be used to develop new tools with higher wear resistance giving better performance, lower costs and lower environmental impact.

Ort, förlag, år, upplaga, sidor
Uppsala: Acta Universitatis Upsaliensis, 2012. s. 52
Nyckelord
tribology, friction, wear, metal working, coatings, wire drawing, hot work rolls
Nationell ämneskategori
Bearbetnings-, yt- och fogningsteknik Metallurgi och metalliska material
Forskningsämne
Stålformning och ytteknik
Identifikatorer
urn:nbn:se:du-11730 (URN)
Presentation
2012-12-14, Clas Ohlson, Skomakargatan 1, Borlänge, 13:00 (Svenska)
Opponent
Handledare
Tillgänglig från: 2013-01-18 Skapad: 2013-01-18 Senast uppdaterad: 2013-01-18Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Övriga länkar

Förlagets fulltext

Sök vidare i DiVA

Av författaren/redaktören
Nilsson, MariaOlsson, Mikael
Av organisationen
Materialteknik
I samma tidskrift
Proceedings of the Institution of mechanical engineers. Part J, journal of engineering tribology
Bearbetnings-, yt- och fogningsteknik

Sök vidare utanför DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetricpoäng

doi
urn-nbn
Totalt: 786 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • chicago-author-date
  • chicago-note-bibliography
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf