Dalarna University's logo and link to the university's website

du.sePublications
Change search
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • chicago-author-date
  • chicago-note-bibliography
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf
Jämförelse av restaustenit i ett härdat verktygsstål för varmarbetsapplikationer: martensitisk och baintisk mikrostruktur
Dalarna University, School of Technology and Business Studies, Materials Technology.
2014 (Swedish)Independent thesis Basic level (degree of Bachelor), 10 credits / 15 HE creditsStudent thesisAlternative title
Retained austenite in a hardened hot-work tool steel: differences between martensitic and bainitic microstructure. (English)
Abstract [sv]

Detta examensarbete har utförts på Uddeholms AB i Hagfors. Prover och mätningar har gjorts på verktygsstålet Uddeholm Dievar. Dievar är ett varmarbetsstål som är bäst lämpat för stora verktyg

Restaustenit finns alltid i härdat högt legerat stål. Den sägs sönderfalla till cementit och ferrit under anlöpning. Sönderfallsprodukten påverkar slagsegheten på ett negativt sätt. En försämrad slagseghet ökar risken för sprickbildning. Genom att minimera restaustenithalten med hjälp av korrekt austenitiseringstemperatur gynnas stålets egenskaper. Proverna som använts har olika austenitiseringstemperaturer och skillnader i svalningstid, en snabb kylning samt en långsam kylning. Den långsamma motsvarar kylningen i kärnan för ett stort verktyg. Jämförelse av strukturer har utförts i svepelektronmikroskop (SEM).  För kartläggning av faser har försök gjorts i SEM, med en EBSD-detektor. Slagseghetsvärden har kopplats samman med restaustenithalt för att på så vis se hur slagsegheten ändras med avseende på restaustenithalten.  Arbetet visar hur austenitiseringstemperatur och svalningstid påverkar restaustenithalten samt hur halten påverkar slagsegheten när den sönderfaller vid anlöpning.

Mikrostrukturen varierar beroende på vilken austenitiseringstemperatur som används. Några slutsatser som kan dras utifrån denna rapport är att restaustenithalten blir högre i det bainitiska provet med lägre autenitiseringstemperatur men lägre i det martensitiska med samma temperatur. Vid sammanställningen av slagseghetsprovningen framgick att det prov med högst restaustenithalt före anlöpning var det prov som hade sämst slagseghet vid Charpy-V provning.

Abstract [en]

This thesis has been conducted at Uddeholms AB in Hagfors. Samples and measurements have been made on a tool steel; Uddeholm Dievar. Dievar is a hot work tool steel which is best suited for large tools.

Retained austenite is always found in hardened high alloyed steel. It is said to decompose into cementite and ferrite during tempering. The decomposition product affects the impact toughness in a negative way. An impaired impact toughness increases the risk for cracking. Using the correct temperature during austenitizing improves the steel properties.

The sample that have been used varies in austenitizing and in cooling rate. There is a fast cooling and one slow cooling rate which corresponds to cooling of the core in a large tool. A comparison have been made on the microstructure of the different samples, this has been conducted in a SEM. The mapping of phases has also been made with the use of a SEM (Scanning Electron Microscope) and with an ESBD-detector (Electron Backscatter Diffraction). The values on impact toughness have been relative to the content of retained austenite. This report shows how the austenitizing and cooling rate affect the contents of retained austenite and how the content influences the impact toughness.

The microstructure of the samples varies depending on austenitizing temperature. Some conclusions that can be made from this thesis are that the content of retained austenite increase with the lowering of the temperature during austenitizing when it comes to bainitic micro structure. In the martensitic sample the retained austenite decreases with the austenitizing temperature. During the assembly of the impact toughness values it showed that the samples with the highest content of retained austenite prior tempering were the ones with the lowest value when the test was conducted.

Place, publisher, year, edition, pages
2014.
Keywords [en]
Tool steel, Uddeholm Dievar, bainite, martensite, retained austenite, impact toughness, Charpy-V, scanning electron microscope, EBSD.
Keywords [sv]
Verktygsstål, Uddeholm Dievar, bainit, martensit, restaustenit, slagseghet, Charpy-V, svepelektronmikroskop, EBSD.
National Category
Materials Engineering
Identifiers
URN: urn:nbn:se:du-14638OAI: oai:DiVA.org:du-14638DiVA, id: diva2:732198
Available from: 2014-07-03 Created: 2014-07-03 Last updated: 2014-07-03Bibliographically approved

Open Access in DiVA

No full text in DiVA

By organisation
Materials Technology
Materials Engineering

Search outside of DiVA

GoogleGoogle Scholar

urn-nbn

Altmetric score

urn-nbn
Total: 1805 hits
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • chicago-author-date
  • chicago-note-bibliography
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf