SKF har installerat en relativt ny härdlinje för stora dimensioner i Göteborg. Härdlinjen är en kvalitets- och kapacitetshöjande investering som främst skall tillgodose den europeiska marknaden. Idag används tre härdrecept som tillgodoser sortimentet för stora dimensioner med rätt kvalitet enligt SKFs interna standard. Nu vill SKF förbättra härdrecepten ytterligare genom att undersöka möjligheten att skapa mer specifika härdrecept utifrån sammansättningen. För att lyckas med detta behövs kunskaper om hur sammansättningen påverkar härdningen. Ett av kvalitetskraven är att hela godset har en undre bainitisk struktur. Den materialegenskap som är ytterst viktig att känna till är härdbarheten. Härdbarheten är ett mått på hur tjocka gods som kan genomhärdas, vilket påverkas av både sammansättningen och austenitiseringen.
I detta examensarbete har bland annat sammansättningens bidrag till härdbarheten och legeringsvariationens påverkan på härdbarheten undersökts. Stålleverantörens sammansättningsvariation för respektive materialstandard är väl kontrollerad och påverkar inte härdbarheten för de rekommenderade godsdimensionerna. Stålleverantören kan därför garantera genomhärdning av en viss tjocklek. Undersökningen som har gjorts i detta arbete visar att denna rekommenderade godstjocklek överskrids och detta måste på något vis kompenseras. En för låg härdbarhet kan effektivast kompenseras genom en temperaturökning, denna begränsas dock av hållfasthetskraven. Huruvida rätt härdparametrar har valts för kompensationen måste dock undersökas, vilket har föreslagits i detta arbete.
SKF has installed a relative new heat treatment line for large dimensions in Gothenburg. The line is a quality and capacity increasing investment which primarily will supply the European market. Currently there are three hardening recipes used to meet the range of large dimensions with the right quality according to SKF’s internal standard. Now, SKF wants to improve the recipes further by investigating the possibility of creating more specific hardening recipes based on the composition. To succeed with this, it is necessary to obtain knowledge regarding the composition’s impact on the hardening. One of the quality requirements is that the entire part has a lower bainitic structure. The material property which is crucial to know about is the hardenability. The hardenability is a measure of how thick dimensions that can be fully hardened, which is influenced by both the composition and the austenitizing treatment.
In this thesis, the composition's contribution to the hardenability and the effect of alloy variations on hardenability has been investigated. The steel supplier’s composition variation for respective material standard is well controlled and do not affect the hardenability for the recommended goods dimensions. The steel supplier can therefore guarantee fully hardening of a certain thickness. The investigation made in this thesis show that this recommended thickness is exceeded and this must somehow be compensated. A low hardenability can effectively be offset by a temperature increase, but this is limited by strength requirements. Whether the correct treatment parameters are selected for compensation must be examined, which has been proposed in this work.