du.sePublikasjoner
Endre søk
Begrens søket
23456 201 - 250 of 287
RefereraExporteraLink til resultatlisten
Permanent link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • chicago-author-date
  • chicago-note-bibliography
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Treff pr side
  • 5
  • 10
  • 20
  • 50
  • 100
  • 250
Sortering
  • Standard (Relevans)
  • Forfatter A-Ø
  • Forfatter Ø-A
  • Tittel A-Ø
  • Tittel Ø-A
  • Type publikasjon A-Ø
  • Type publikasjon Ø-A
  • Eldste først
  • Nyeste først
  • Skapad (Eldste først)
  • Skapad (Nyeste først)
  • Senast uppdaterad (Eldste først)
  • Senast uppdaterad (Nyeste først)
  • Disputationsdatum (tidligste først)
  • Disputationsdatum (siste først)
  • Standard (Relevans)
  • Forfatter A-Ø
  • Forfatter Ø-A
  • Tittel A-Ø
  • Tittel Ø-A
  • Type publikasjon A-Ø
  • Type publikasjon Ø-A
  • Eldste først
  • Nyeste først
  • Skapad (Eldste først)
  • Skapad (Nyeste først)
  • Senast uppdaterad (Eldste først)
  • Senast uppdaterad (Nyeste først)
  • Disputationsdatum (tidligste først)
  • Disputationsdatum (siste først)
Merk
Maxantalet träffar du kan exportera från sökgränssnittet är 250. Vid större uttag använd dig av utsökningar.
  • 201.
    Saketi, Sara
    et al.
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik. Uppsala Universitet.
    Sveen, Susanne
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik. Linköpings Universitet.
    Gunnarsson, S
    Uddeholm Tooling.
    M’Sauobi, R
    Seco Tools.
    Olsson, Mikael
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Wear of a high cBN content PCBN cutting tool during hard milling of powder metallurgy cold work tool steels2015Inngår i: Wear, ISSN 0043-1648, E-ISSN 1873-2577, Vol. 332, s. 752-761Artikkel i tidsskrift (Annet vitenskapelig)
    Abstract [en]

    The wear characteristics of a high cBN content PCBN cutting tool during hard milling of two different hardened cold work tool steels have been evaluated. Post-cutting examination of the worn cutting inserts was performed using high resolution field emission gun scanning electron microscopy, energy dispersive X-ray spectroscopy, Auger electron spectroscopy and optical surface profilometry. Also, the machined work material surfaces and collected chips were characterized in order to evaluate the prevailing wear mechanisms. The results show that both flank and crater wear are controlled by continuous wear due to tribochemical reactions, adhesive wear and mild abrasive wear. Besides, the cutting inserts show a tendency to micro-chipping along the cutting edge especially at higher cutting speed. The latter mechanism was also found to be dependent on type of work material. High lateral resolution Auger electron spectroscopy of the crater region shows that the worn surface is covered by a thin SixOy rich tribofilm with a thickness of 50-500 nm, the tribofilm being thicker on the binder phase regions. Also, the Co-rich regions of the binder phase seem to be more tribochemically affected by the prevailing contact conditions as compared with the W-rich regions of the binder phase and the cBN phase. 

  • 202.
    Saketi, Sara
    et al.
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik. Ångström Tribomaterials Group, Uppsala University.
    Östby, J.
    AB Sandvik Coromant, Sandviken.
    Olsson, Mikael
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik. Ångström Tribomaterials Group, Uppsala University.
    Influence of tool surface topography on the material transfer tendency and tool wear in the turning of 316L stainless steel2016Inngår i: Wear, ISSN 0043-1648, E-ISSN 1873-2577, Vol. 368–369, s. 239-252Artikkel i tidsskrift (Fagfellevurdert)
    Abstract [en]

    Abstract The influence of tool surface topography on the initiation and build-up of transfer layers in the orthogonal turning of 316L austenitic stainless steel have been studied under well controlled conditions. Tool materials include CVD Ti(C,N)-Al2O3-TiN and PVD (Ti, Al)N-(Al,Cr)2O3 coated cemented carbide inserts prepared using different grinding and polishing treatments. Post-test characterization of the inserts was performed using high resolution scanning electron microscopy and energy dispersive X-ray spectroscopy. The results show that the transfer tendency of work material is strongly affected by the surface topography of the rake face. For both types of inserts, the initial transfer and the build-up of transfer layers are localised to microscopic surface irregularities on the rake face. Consequently, an appropriate surface treatment of the cemented carbide substrate before coating deposition and the as-deposited CVD and PVD coating can be used in order to reduce the transfer tendency and the mechanical interaction between the mating surfaces. Also, an improved surface finish was found to reduce coating wear and consequently the crater wear rate of the inserts investigated. This can most likely be explained by the reduced tendency to discrete chipping of coating fragments in the contact zone and the formation of a thin transfer layer composed of Al, Si, Ca, O with beneficial friction properties which are promoted by a smooth coating surface.

  • 203.
    Saketi, Sara
    et al.
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik. Uppsala universitet.
    Östby, Jonas
    Bexell, Ulf
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Olsson, Mikael
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    A methodology to systematically investigate the diffusion degradation of cemented carbide during machining2019Inngår i: Materials, ISSN 1996-1944, E-ISSN 1996-1944, Vol. 12, nr 14, artikkel-id 2271Artikkel i tidsskrift (Fagfellevurdert)
    Abstract [en]

    Using Ti6Al4V as a work material, a methodology to systematically investigate the diffusion degradation of cemented carbide during machining is proposed. The methodology includes surface characterization of as-tested worn inserts, wet etched worn inserts, metallographic cross-sectioned worn inserts as well as the back-side of the produced chips. Characterization techniques used include scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), Auger electron spectroscopy (AES) and time of flight secondary ion mass spectroscopy (ToF-SIMS).

    The results show that the characterization of wet etched worn inserts give quick and useful information regarding the diffusion degradation of cemented carbide, in the present work the formation of a fine crystalline W layer (carbon depleted WC layer) at the tool / work material interface. The present study also illuminates the potential of AES analysis when it comes to analyzing the degradation of cemented carbide in contact with the work material during machining. The high surface sensitivity in combination with high lateral resolution makes it possible to analyze the worn cemented carbide surface on a sub-µm level. Especially AES sputter depth profiling, resulting in detailed information of variations in chemical composition across interfaces, is a powerful tool when it comes to understanding diffusion wear. Finally, the present work illustrates the importance of analyzing not only the worn tool but also the produced chips. An accurate characterization of the back-side of the chips will give important information regarding the wear mechanisms taking place at the tool rake face / chip interface. Surface analysis techniques such as AES and ToF-SIMS are well suited for this type of surface characterization.

  • 204.
    Saketi, Sara
    et al.
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik. Uppsala universitet.
    Östby, Jonas
    Bexell, Ulf
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Olsson, Mikael
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik. Uppsala universitet.
    Wear behaviour of two different cemented carbide grades in turning 316 L stainless steel2018Inngår i: Materials Science Forum, ISSN 0255-5476, E-ISSN 1662-9752, Vol. 941, s. 2367-2372Artikkel i tidsskrift (Fagfellevurdert)
    Abstract [en]

    Cemented carbides are the most common cutting tools for machining various grades of steels. In this study, wear behavior of two different cemented carbide grades with roughly the same fraction of binder phase and carbide phase but different grain size, in turning austenitic stainless steel is investigated. Wear tests were carried out against 316L stainless steel at 180 and 250 m/mincutting speeds. The worn surface of cutting tool is characterized using high resolution scanning electron microscopy (SEM), Energy dispersive X-ray spectroscopy (EDX), Auger electron spectroscopy (AES) and 3D optical profiler.The wear of cemented carbide in turning stainless steel is controlled by both chemical and mechanical wear. Plastic deformation, grain fracture and chemical wear is observed on flank and rake face of the cutting insert. In the case of fine-grained, the WC grains has higher surface contact with the adhered material which promotes higher chemical reaction and degradation of WC grains, so chemical wear resistance of the composites is larger when WC grains are larger. The hardness of cemented carbide increase linearly by decreasing grain size, therefore mechanical wear resistance of the composites is larger when WC grains are smaller.

  • 205.
    Sandberg, Andreas
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Kvalitativ jämförelse av mätt planhet efter sista valsparet i varmvalsverket jämfört med riktverksinställning på formatsträcka2015Independent thesis Basic level (degree of Bachelor), 10 poäng / 15 hpOppgave
    Abstract [sv]

    Kunderna i stålbranschen ställer allt högre krav på att plåten ska kunna levereras

    plan och spänningsfri. På SSAB arbetar man hela tiden med att förbättra planheten

    på formatklippta plåtar. Plåten riktas i riktverken på formatsträckan för att

    förbättra planheten. Efter en ombyggnation i varmvalsverket har

    planhetsmätningen på färdigsträckan förbättrats och det har resulterat i att

    planheten på banden kan studeras bättre.

    Syftet med examensarbetet är att kalibrera planhetsmätaren i varmvalsverket till

    ”sann” planhet och undersöka ifall det finns något samband mellan olika

    riktverksinställningar och planheten på plåten.

    Två olika produktionsförsök utfördes på SSAB:s anläggning i Borlänge. Mätdata

    ifrån varmvalsverket och formatsträcka 4 sammanställdes i statistikprogrammet

    Minitab och resultaten tolkades med avseende på riktverksinställning och planhet.

    Resultaten visar att band från varmvalsverket som är kantlånga på bandets frisida

    får bättre planhet efter riktningen jämfört med band som har riktats och varit

    mittlånga eller kantlånga på drivsidan. Banden från varmvalsverket som är

    kantlånga på frisidan är lättare att rikta på formatsträcka 4. Det beror på att

    riktverksinställningarna har kunnat vara inställda på samma mätvärden som

    börvärdena. För att rikta banden bra bör riktverkens olika inställningar vara

    inställda på börvärdena.

  • 206. Sandell, A.
    et al.
    Karlsson, P. G.
    Richter, J. H.
    Blomquist, J.
    Uvdal, P.
    Grehk, Mikael
    Högskolan Dalarna, Akademin Industri och samhälle, Materialvetenskap.
    Growth of ultrathin ZrO2 films on Si(100): film-thickness-dependent band alignment2007Inngår i: Applied Physics Letters, ISSN 0003-6951, E-ISSN 1077-3118, Vol. 88, nr 13, artikkel-id 132905Artikkel i tidsskrift (Fagfellevurdert)
    Abstract [en]

    The band alignment of ultrathin ZrO2 films of different thickness formed on Si(100) have been monitored with synchrotron radiation photoelectron spectroscopy and x-ray absorption spectroscopy. The films were deposited sequentially by way of metal-organic chemical-vapor deposition in ultrahigh vacuum. A significant decrease in the conduction band offset is found for increasing film thickness. It is accompanied by a corresponding increase of the valence band offset. The variations originate in the formation of an interfacial layer characterized by a lower degree of Zr-O interaction than in bulk ZrO2 but with no clear evidence for partially occupied Zr 4d dangling bonds.

  • 207.
    Schultheiss, F
    et al.
    Lunds Universitet.
    Fallqvist, Mikael
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    M’Sauobi, R
    Seco Tools.
    Olsson, Mikael
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Ståhl, J E
    Lunds Universitet.
    Influence of CVD Al2O3 coated tool surface micro topography on the tribological characteristics in metal cutting: part II2013Inngår i: Wear, ISSN 0043-1648, E-ISSN 1873-2577, Vol. 298, s. 23-31Artikkel i tidsskrift (Fagfellevurdert)
    Abstract [en]

    The tribological conditions at the contact between the cutting tool and the chip are of great importance when analyzing the machining process. By knowing the contact conditions on the rake face of the cutting tool the wear on the clearance and rake face may be predicted in terms of size and type of wear. A certain value of the surface stresses is often thought of as leading to a higher wear rate of the cutting tool and thus a shorter tool life. In this article two different methods for experimentally measuring the contact condition on the clearance and rake face of the cutting tool are presented and illustrated with results obtained while turning AISI 4140. Results are also obtained in terms of how the surface roughness value of the cutting tool influences the contact condition. It was found that the tool surface topography may have a significant impact on the tribological performance during machining.

  • 208. Scudino, S.
    et al.
    Surreddi, Kumar Babu
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Shear band morphology and fracture behavior of cold-rolled Zr52.5Ti5Cu18Ni14.5Al10 bulk metallic glass under tensile loading2017Inngår i: Journal of Alloys and Compounds, ISSN 0925-8388, E-ISSN 1873-4669, Vol. 708, s. 722-727Artikkel i tidsskrift (Fagfellevurdert)
    Abstract [en]

    The effect of the shear bands generated by cold rolling on the tensile ductility and fracture behavior of the Zr52.5Ti5Cu18Ni14.5Al10 bulk metallic glass (BMG) is analyzed. The results reveal significant changes in the fracture behavior of the cold-rolled material with respect to the as-cast BMG. Fracture in the cold-rolled glass occurs along the pre-existing shear bands forming an angle of 45° with the loading direction. In addition, the fracture morphology shows a regular vein pattern oriented along the shear direction, which indicates that a considerable shear stress is active on the fracture plane. This is in contrast to the fracture behavior of the as-cast glass, where the normal stress plays a significant role. Here, the fracture angle is 55° and the fracture surface is characterized by the conventional irregular pattern of radiating ridges. Finally, work-hardening was observed in the cold-rolled BMG even in the absence of visible shear band intersection. Possible alternative mechanisms for determining this behavior are discussed. © 2017 Elsevier B.V.

  • 209.
    Scudino, S.
    et al.
    IFW Dresden, Inst Complex Mat, Solidificat Proc & Complex Struct, Helmholtzstr 20, D-01069 Dresden, Germany..
    Surreddi, Kumar Babu
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Wang, G.
    Shanghai Univ, Lab Microstruct, Shanghai 200444, Peoples R China..
    Liu, G.
    Xi An Jiao Tong Univ, State Key Lab Mech Behav Mat, Xian 710049, Peoples R China.;Xi An Jiao Tong Univ, Sch Mat Sci & Engn, Xian 710049, Peoples R China..
    Effect of stress concentration on plastic deformation of Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glass under compressive loading2016Inngår i: Materials letters (General ed.), ISSN 0167-577X, E-ISSN 1873-4979, Vol. 179, s. 202-205Artikkel i tidsskrift (Fagfellevurdert)
    Abstract [en]

    The influence of different sources of stress concentration on the plastic deformation of the Zr41.2Ti13.8Cu12.5Ni10Be22.5 metallic glass during room temperature compression tests is evaluated. Stress concentration introduced by sample geometry has a significant effect on the mechanical properties: in contrast to the specimen with square cross-section, which shows negligible plastic deformation, a substantial improvement in the plasticity can be achieved for the sample with round cross-section. Simulations of the stress distribution during the compression tests reveal that the stress concentration at the interface corners is responsible for the early fracture of the sample with square cross-section. Additionally, stress concentration during compression tests in the samples with square cross-section can be significantly reduced, and plastic deformation can be enhanced, by removing the interface corners as well as by reducing the friction arising between loading platens and specimen. 

  • 210.
    Selo Mustafa, Muhammed
    et al.
    Högskolan Dalarna, Akademin Industri och samhälle, Materialvetenskap.
    Osterman, Jesper
    Högskolan Dalarna, Akademin Industri och samhälle, Materialvetenskap.
    Tunell, Helena
    Högskolan Dalarna, Akademin Industri och samhälle, Materialvetenskap.
    Skarp, Kent
    Högskolan Dalarna, Akademin Industri och samhälle, Materialvetenskap.
    Kozlovsky, M.
    Synthesis, spectroscopic characterisation and alignment of novel azobenzene containing monomers2005Inngår i: Liquid crystals (Print), ISSN 0267-8292, E-ISSN 1366-5855, Vol. 32, nr 7, s. 901-908Artikkel i tidsskrift (Fagfellevurdert)
    Abstract [en]

    A series of novel bifunctionalized photochromic monomers were synthesized, focusing on those with polymerizable acrylic/methacrylic groups attached to both ends of an azobenzene core via flexible spacers. The phase behaviour of the monomers was investigated using DSC, polarizing optical microscopy and X‐ray diffraction. The change in UV‐vis absorbance of the monomers under illumination with non‐polarized/polarized UV light was studied for both solutions and thin films; also studied was its relaxation in the dark. On illumination with LPUV light, in‐plane reorientation of the molecules normal to the polarization of the exciting UV light, and aggregation of the molecules in the films, were found.

  • 211.
    Sepehr, Omid
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Optimering av härdrecept – En förstudie2015Independent thesis Basic level (degree of Bachelor), 10 poäng / 15 hpOppgave
    Abstract [sv]

    SKF har installerat en relativt ny härdlinje för stora dimensioner i Göteborg. Härdlinjen är en kvalitets- och kapacitetshöjande investering som främst skall tillgodose den europeiska marknaden. Idag används tre härdrecept som tillgodoser sortimentet för stora dimensioner med rätt kvalitet enligt SKFs interna standard. Nu vill SKF förbättra härdrecepten ytterligare genom att undersöka möjligheten att skapa mer specifika härdrecept utifrån sammansättningen. För att lyckas med detta behövs kunskaper om hur sammansättningen påverkar härdningen. Ett av kvalitetskraven är att hela godset har en undre bainitisk struktur. Den materialegenskap som är ytterst viktig att känna till är härdbarheten. Härdbarheten är ett mått på hur tjocka gods som kan genomhärdas, vilket påverkas av både sammansättningen och austenitiseringen.

    I detta examensarbete har bland annat sammansättningens bidrag till härdbarheten och legeringsvariationens påverkan på härdbarheten undersökts. Stålleverantörens sammansättningsvariation för respektive materialstandard är väl kontrollerad och påverkar inte härdbarheten för de rekommenderade godsdimensionerna. Stålleverantören kan därför garantera genomhärdning av en viss tjocklek. Undersökningen som har gjorts i detta arbete visar att denna rekommenderade godstjocklek överskrids och detta måste på något vis kompenseras. En för låg härdbarhet kan effektivast kompenseras genom en temperaturökning, denna begränsas dock av hållfasthetskraven. Huruvida rätt härdparametrar har valts för kompensationen måste dock undersökas, vilket har föreslagits i detta arbete.

  • 212.
    Skalare, Henrik
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Optimering av patenteringsprocess: En undersökning om blypatentering2014Independent thesis Basic level (degree of Bachelor), 10 poäng / 15 hpOppgave
    Abstract [sv]

    Vid värmebehandling av fjäder – och pianotråd används blypatenteringsprocessen för framställning av klena tråddimensioner. Under processen vill man få den grova lamellstrukturen av perlit att bli finlamellär. Tråden värms upp i austenitområdet vid en temperatur av ca 900 °C för att sedan kylas ner till en temperatur av ca 530 °C i ett bad med flytande bly. Denna värmebehandling ger väldigt tunna lameller med ferrit och cementit, finlamellär perlit. Arbetet kommer ta upp de mikrostrukturer som har bildats vid behandlingen. Olika testmetoder har använts för att understryka att mikrostrukturerna är de rätta för denna typ av värmebehandling och stålsort. Studien kommer undersöka patenteringsprocessen hos Springwire AB i Lesjöfors. Om upptäckter sker att processen har ett felaktigt tillvägagångssätt eller att fel mikrostrukturer erhålls kommer dessa att rättas till under arbetets tid. Mikrostrukturen har efter analyser konstaterats att det är den önskade finlamellära perliten som växt fram med små karbider av cementit i grundmassan. Efter överläggande med berörda parter kunde slutsatsen dras att patenteringsprocessen har något förhöjda hastigheter jämfört med de teoretiska hastigheterna. Efter att resultaten presenterades har olika förslag framtagits för att förbättra processen.

  • 213.
    Ssemakula, Hamzah
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Minimization of stock weight during close-die forging of a spindle2013Inngår i: Materials Sciences and Applications, ISSN 2153-117X, E-ISSN 2153-1188, Vol. 4, s. 217-224Artikkel i tidsskrift (Fagfellevurdert)
    Abstract [en]

    In this paper, Finite Element method and full-scale experiments have been used to study a hot forging method for fabri-cation of a spindle using reduced initial stock size. The forging sequence is carried out in two stages. In the first stage, the hot rolled cylindrical billet is pre-formed and pierced in a closed die using a spherical nosed punch to within 20 mm of its base. This process of piercing or impact extrusion leads to high strains within the work piece but requires high press loads. In the second stage, the resulting cylinder is placed in a die with a flange chamber and upset forged to form a flange. The stock mass is optimized for complete die filling. Process parameters such as effective strain distribution, material flow and forging load in different stages of the process are analyzed. It is concluded from the simulations that minor modifications of piercing punch geometry to reduce contact between the punch and emerging vertical walls of the cylinder appreciably reduces the piercing load. In the flange chamber, a die surfaces angle of 52° instead of 45° is pro-posed to ensure effective material flow and exert sufficient tool pressure to achieve complete cavity filling. In order to achieve better compression, it is also proposed to shorten both the length of the inserted punch and the die “tongues” by a few mm.

  • 214. Stanciu, V.
    et al.
    Wilhelmsson, O.
    Bexell, Ulf
    Högskolan Dalarna, Akademin Industri och samhälle, Materialvetenskap.
    Adell, M.
    Sadowski, J.
    Kanski, J.
    Warnicke, P.
    Svedlindh, P.
    Influence of annealing parameters on the ferromagnetic properties of optimally passivated (Ga,Mn)As epilayers2005Inngår i: Physical Review B. Condensed Matter and Materials Physics, ISSN 1098-0121, E-ISSN 1550-235X, Vol. 72, nr 12, artikkel-id 125324Artikkel i tidsskrift (Fagfellevurdert)
    Abstract [en]

    The influence of annealing parameters—temperature (Ta) and time (ta)—on the magnetic properties of As-capped (Ga,Mn)As epitaxial thin films has been investigated. The dependence of the transition temperature (TC) on ta marks out two regions. The TC peak behavior, characteristic of the first region, is more pronounced for thick samples, while for the second ("saturated") region the effect of ta is more pronounced for thin samples. A right choice of the passivation medium, growth conditions along with optimal annealing parameters routinely yield TC-values of ~150 K and above, regardless of the thickness of the epilayers

  • 215.
    Stenström, Mikael
    Högskolan Dalarna, Akademin Industri och samhälle, Materialvetenskap.
    Deposited copper as lubrication when drawing of titanium wire; a study of method.2016Independent thesis Basic level (degree of Bachelor), 10 poäng / 15 hpOppgave
    Abstract [en]

    This work performed at Sandvik Materials Technology has studied the possibility of using copper as lubrication during Ti-wire drawing. A PVD-method was used to deposit Cu on Ti-wires. The PVD coated copper samples were compared to a reference material of solid Cu which first had to be recrystallized. Different reduction combinations were investigated in the wire drawing and the Cu-coated wires were drawn both without and with MoS2 lubrication. Values, including drawing forces, HV and tensile testing, from already drawn Ti-wires without Cu were included in the matrix and the drawing forces were then compared. Significant contributions of friction were present in the first draw of all unlubricated Cu-coated Ti-wires. The forces decreased considerably after the first draw. After four drawings, done on one of these wires, the forces then were in the same region as the lubricated wires at the same reductions. No clear tendencies of uneven hardening were observed regardless of friction or used reduction. Tensile testing after wire drawing could not be performed as the wires broke at the wrong places. Measurements of residual stress on worked and unworked Cu-layers showed no residual stress, surprisingly. This study shows that Cu can be used as lubrication if the process is optimized with respect to Cu layer thickness, drawing tool-angles and reduced tungsten carbide grain size in drawing tools. A smoothening draw is needed before reduction of the Ti-wire to help lower the friction.

  • 216.
    Stjärne, Linice
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Materialanalys och jämförelse av badrumsskåp från tre olika tillverkare2015Independent thesis Basic level (degree of Bachelor), 10 poäng / 15 hpOppgave
    Abstract [sv]

    Denna rapport bygger på ett examensarbete som utförts i samarbete med CSI Nordic AB. Arbetet är till för att hjälpa en kund att få mer kunskap och information om en av dess egna produkter, som är ett badrumsskåp, och även två konkurrenters badrumsskåp.

    Rapporten innehåller en materialanalys av de tre badrumsskåpen, som på grund av anonymitetsbegäran benämns A, B och C.

    Prover som har utförts är livslängdsprovning genom fuktexponering, dragprovning, hårdhetsmätning och repprovning. Det har även genomförts strukturanalyser av stålen och kemiska analyser av material och ytbeläggningar.

    Resultatet av proverna visar badrumsskåpen är tillverkade i likvärdiga stål, dvs. stålen har mycket små skillnader i kemisk sammansättning och mekaniska egenskaper. Skåp A uppvisar tydliga skillnader i struktur och hårdhet mellan prover uttagna längs eller tvärs valsriktningen.

    Repprovningen visar att skåp B och skåp C har mycket sämre repmotstånd än skåp A, vilket beror på färgskiktets sammansättning, egenskaper och vidhäftning. Den kemiska analysen av beläggningarna visar att skåp A och B har en zinkbeläggning, medan skåp C har en zinkfosfatbeläggning. Skåp C var även det enda skåp som uppvisade lokal korrosion vid avslutad fuktexponering

  • 217.
    Storck, Joakim
    Högskolan Dalarna, Akademin Industri och samhälle, Materialvetenskap.
    Exploring improvement trajectories with dynamic process cost modelling: a case from the steel industry2010Inngår i: International Journal of Production Research, ISSN 0020-7543, E-ISSN 1366-588X, Vol. 48, nr 12, s. 3493-3511Artikkel i tidsskrift (Fagfellevurdert)
    Abstract [en]

    Improvement trajectories are sequential managed chains of improvement initiatives required to handle changes in competition and market. This paper presents a five-step framework, based on dynamic process cost modelling, which was developed during a four-year research project at a major stainless steel producer, to support the selection of an improvement trajectory based on strategic requirements to combine high product diversity with cost reduction. The framework aims to develop insight into what manufacturing capabilities are required to reach the strategic goals by combining system dynamics simulation with process cost modelling and visual exploratory data analysis in an iterative modelling procedure. The applicability of the five-step framework is demonstrated through a case study from the steel industry, in which a goal driven analysis is used to assess process requirements based on performance and market considerations.

  • 218.
    Storck, Joakim
    Högskolan Dalarna, Akademin Industri och samhälle, Materialvetenskap.
    Product variety and upstream versus downstream flexibility2009Inngår i: Proceedings of the International 3'rd Swedish Production Symposium / [ed] Rosén, B.G., Göteborg, 2009, s. 304-309Konferansepaper (Fagfellevurdert)
    Abstract [en]

    Niche market steel producers tend to manufacture a wide range of products that are sold in low quantities. Current steelmaking—continuous casting (SCC) technology forces producers to operate according to combined make–to–stock/make–to–order order policies and keep in–process inventory. This leads to intermediate cooling of workpieces, high energy consumption, and high inventory and reheating costs. This paper evaluates links between product range and process flexibility upstream and downstream form the customer order decoupling point. The operational capabilities that result from improved process flexibility make diversified low cost steel production possible. At the same time the environmental sustainability of production can be improved. The strategic importance of process flexibility improvements are discussed with reference to the concept of competitive frontiers.

  • 219.
    Storck, Joakim
    Högskolan Dalarna, Akademin Industri och samhälle, Materialvetenskap.
    Product variety, flexibility and energy use in hot rolling mills2012Inngår i: Enabling Manufacturing Competitiveness and Economic Sustainability: Proceedings of the 4th International Conference on Changeable,Agile, Reconfigurable and Virtual production (CARV2011),Montreal, Canada, 2-5 October 2011 / [ed] ElMaraghy, Hoda, Montreal: Springer, 2012, Vol. 2, s. 80-85Konferansepaper (Fagfellevurdert)
    Abstract [en]

    Hot rolling consumes one third of the energy in a steel plant. Increasing product variety slows down production flow, causing heat losses and increased reheating energy consumption. A system dynamics model was developed to evaluate how flexibility influences energy use. Results indicate that world best practice requires high flexibility and low to intermediate product variety. Up to 28% less reheating was needed for low product variety, but no improvement was obtained for high product variety; a flexible steelmaking process for efficient production of small batches of steel would be required. The strategic nature of process flexibility investments is discussed.

  • 220.
    Storck, Joakim
    Högskolan Dalarna, Akademin Industri och samhälle, Materialvetenskap. Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik. Kungliga tekniska högskolan.
    Strategic and operational capabilities in steel production: Product variety and performance2009Doktoravhandling, monografi (Annet vitenskapelig)
    Abstract [en]

    Steel producers that employ niche market strategies are continuously seeking to reduce production cost while maintaining a diverse product mix. The business model is typically based on marketing of high–strength special or stainless steels. However, the desire to avoid direct cost competition is over time gradually leading towards increased product variety and smaller order volumes (tonnes per order) for each product. This thesis analyses how production cost is linked to product variety in steel strip production. Results are based on new models for assessment of opportunities for performance improvement in high product–variety steel production. The need for flexible production processes increases with increasing product variety. Operational capabilities linked to process flexibility determine the extent to which steel producers can eliminate in–process inventory and accomplish close coupling between process steps. Niche market producers that invest in process flexibility improvements can lower production costs both due to reduced work–in–process and lower energy consumption. An additional benefit is reduced environmental impact. The following problems are addressed: • Development of a method to assess the influence of product variety on performance in steel production. • Development of models of continuous casting and hot rolling that account for product variety and cost effects with consideration of varying degrees of process flexibility. • Development of a strategy process model that focus on the strategic value of operational capabilities related to process flexibility. Investments in operational capabilities regarding process flexibility have a strategic impact. An appreciation for the effects of process flexibility should permeate the organisation’s daily work since the accumulated contribution of many, seemingly unimportant, incremental changes significantly influences the strategic opportunities of the company.

  • 221.
    Storck, Joakim
    et al.
    Högskolan Dalarna, Akademin Industri och samhälle, Materialvetenskap.
    Lindberg, Bengt
    A lean production strategy for hot charge operation of a steel mill2007Inngår i: IET Conference publications, Issue 528, 2007, 2007, Vol. 528, s. 158-167Konferansepaper (Fagfellevurdert)
    Abstract [en]

    This paper aims to show how a strategy based on lean production can aid the implementation of hot-charge operation in steel strip production. Key parameters in a lean strategy for steel manufacturing are identified, and it is shown that lean production targets the difficulties that are traditionally associated with hot charging. Hot charging amounts to a closer level of integration of the continuous casting and hot rolling processes. The conclusions are that implementation of hot charging can be seen as a waste-reduction process within a lean production strategy, and that there are substantial cost savings to be made once the full benefits of a lean production strategy are considered.

  • 222.
    Storck, Joakim
    et al.
    Högskolan Dalarna, Akademin Industri och samhälle, Materialvetenskap.
    Lindberg, Bengt
    Assessment of best scheduling practice in continuous casting and hot rolling of stainless steel strip by system dynamics simulation2007Inngår i: Key Engineering Materials, ISSN 1013-9826, E-ISSN 1662-9795, Vol. 344, s. 897-904Artikkel i tidsskrift (Fagfellevurdert)
    Abstract [en]

    A rapid flow of materials with little intermediate buffering between steel mill and hot strip mill has many benefits. One is energy savings due to raised charging temperature in the reheat furnaces of the hot strip mill. Another is that tied capital is freed up, thereby improving mill economy. Still, it is not unusual that average lead-time is in the order of days, or even weeks. The aim of the present work was to show how lead-times from casting to rolling could be improved by changes in the scheduling function. A System Dynamics model of a stainless steel strip production facility with continuous caster and hot rolling mill was created. The model was used to study the dynamics of the system in response to changes in parameters that defined the scheduling configuration. More frequent schedule updating generally resulted in less work in process (WIP) and shorter lead times from casting to rolling, with resulting higher charging temperatures. The amount of oscillation in the system was also reduced. More frequent work roll changes were required when scheduling frequency increased, resulting in an increased fraction of setup time in relation to total processing time. Therefore, a development towards increased scheduling frequency may have to be complemented by efforts to reduce changeover times. The conclusion was that dynamic scheduling routines with frequent schedule updating result in better overall performance of the system due to lower WIP and better heat utilization. Dynamic scheduling routines with frequent updates make the system respond better to changes in the system and give better overall performance. The result is lower WIP, increased energy efficiency and less oscillation in the system.

  • 223.
    Surreddi, Kumar Babu
    et al.
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Oikonomou, C.
    Uddeholms AB, SE-68385 Hagfors, Sweden..
    Karlsson, P.
    Orebro Univ, Dept Mech Engn, SE-70182 Orebro, Sweden..
    Olsson, Mikael
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Pejryd, L.
    Orebro Univ, Dept Mech Engn, SE-70182 Orebro, Sweden..
    In-situ micro-tensile testing of additive manufactured maraging steels in the SEM: Influence of build orientation, thickness and roughness on the resulting mechanical properties2018Inngår i: La Metallurgia Italiana, ISSN 0026-0843, nr 3, s. 27-33Artikkel i tidsskrift (Fagfellevurdert)
    Abstract [en]

    Selective laser melting (SLM) is frequently used additive manufacturing technique capable of producing various complex parts including thin-wall sections. However the surface roughness is a limiting factor in thin sections produced by SLM process when strength is the main criterion. In this study, the influence of build orientation, thickness and roughness on the resulting mechanical properties of as-built test samples was investigated. Various thin sheets of EN 1.2709 maraging steel built in horizontal and vertical orientations produced by SLM were investigated using in-situ micro-tensile testing in a scanning electron microscope. The mechanical strength and deformation mechanisms were analyzed and explained based on thickness and build orientation. Increased ductility was observed in thicker samples as well as in the horizontal build samples. The results illustrate the potential of the in-situ test technique and aspects important to consider in design guidelines for thin AM structures.

  • 224.
    Surreddi, Kumar Babu
    et al.
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Oikonomou, Christos
    Karlsson, Patrik
    Olsson, Mikael
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Pejryd, Lars
    In-situ Micro-tensile Testing of Additive Manufactured Maraging Steels in the SEM: Influence of Build Orientation, Thickness and Roughness on the Resulting Mechanical Properties2017Inngår i: Proceedings Euro PM 2017: International Powder Metallurgy Congress and Exhibition2017: Session 30: Mechanical Behaviour of AM Materials, 2017, artikkel-id Session 30Konferansepaper (Fagfellevurdert)
    Abstract [en]

    Selective laser melting (SLM) is frequently used additive manufacturing technique capable of producing various complex parts including thin-wall sections. However the surface roughness is a limiting factor in thin sections produced by SLM process when strength is the main criterion. In this study, the influence of build orientation, thickness and roughness on the resulting mechanical properties of as-built test samples was investigated. Various thin sheets of EN 1.2709 maraging steel built in horizontal and vertical orientations produced by SLM were investigated using in-situ micro-tensile testing in a scanning electron microscope. The mechanical strength and deformation mechanisms were analyzed and explained based on thickness and build orientation. Increased ductility was observed in thicker samples as well as in the horizontal build samples. The results illustrate the potential of the in-situ test technique and aspects important to consider in design guidelines for thin AM structures.

  • 225.
    Surreddi, Kumar Babu
    et al.
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Olsson, Mikael
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Wear of cemented carbide nibs in steel wire drawing2018Inngår i: The 18th Nordic Symposium on Tribology – NORDTRIB 2018 / [ed] Prof. Staffan Jacobson, 2018Konferansepaper (Annet vitenskapelig)
    Abstract [en]

    The tribological interaction between a cemented carbide drawing die and a steel wire under lubricated wire drawing conditions has been characterized using 3D optical surface profilometry, scanning electron microscopy and energy dispersive X-ray spectroscopy. The results show that wear of the cemented carbides mainly is located to three different wear zones, i) at the entrance of the reduction zone, ii) at the exit of the reduction zone/ entrance of the bearing zone and iii) at the exit of the bearing zone. In the first wear zone, wear of the cemented carbide occurs on a WC grain size level and is controlled by plastic deformation, cracking and fragmentation of individual WC grains. In the second wear zone, wear of the cemented carbide is controlled by chipping of small WC/Co composite fragments resulting in craters, ~ 10μm in diameter.

  • 226.
    Surreddi, Kumar Babu
    et al.
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Yvell, Karin
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Norgren, Susanne
    Sandvik Mining and Rock Technology, Rock Tools division, Sweden; Department of Engineering Sciences, Uppsala University, Sweden.
    Olsson, Mikael
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Characterization of surface degradation and wear damage Of cemented carbide in rock drilling2018Inngår i: The 18th Nordic Symposium on Tribology – NORDTRIB 2018 / [ed] Prof. Staffan Jacobson, 2018Konferansepaper (Annet vitenskapelig)
    Abstract [en]

    In this work, worn top hammer drill bit buttons after underground drifting in Granodiorite are analysed using scanning electron microscopy (SEM), Auger electron spectroscopy (AES) and electron backscatter diffraction (EBSD) to understand the dominant surface failure and wear mechanisms on the flank wear land region, i.e. the outer side of the gauge row cemented carbide buttons. SEM shows that the worn surface of the flank wear land is partly covered with islands of a thin rock material transfer layer and that the exposed cemented carbide show deformed, cracked and fragmented WC grains. AES gives that the transferred rock material is mainly located on the surface but may penetrate into cemented carbide microstructure to a depth of 1-2 WC grain diameters. Finally, EBSD reveals that the deformation of the cemented carbide in the flank wear land region is located to a thin zone, about ~10 μm in depth.

  • 227.
    Sveen, Susanne
    et al.
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik. Linköping University, SE-581 83 Linköping, Sweden.
    Andersson, J
    Seco Tools.
    M’Sauobi, R
    Seco Tools.
    Olsson, Mikael
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Scratch adhesion characteristics of PVD TiAlN deposited on high speed steel, cemented carbide and PCBN substrates2013Inngår i: Wear, ISSN 0043-1648, E-ISSN 1873-2577, Vol. 308, nr 1-2, s. 133-141Artikkel i tidsskrift (Fagfellevurdert)
    Abstract [en]

    Modern tool materials, ranging from powder metallurgical high speed steel to super hard materials such as polycrystalline cubic boron nitride and diamond, are used as cutting tools in the metal cutting industry. In order to further improve the cutting performance, these tools are frequently coated by thin, hard PVD coatings such as TiN, TiAlN, AlCrO3, etc. In order to develop and design new PVD coatings it is important to characterize the mechanical properties of the coatings and understand the coating/substrate deformation mechanisms in a tribological contact, e.g. metal cutting. For example, it is important to be aware that the mechanical properties of the substrate (tool material) have a significant impact on the practical coating adhesion and the coating failure mechanisms.

    In the present study scratch testing has been used in order to evaluate to increase the understanding of the mechanical response and potential coating failure modes of cathodic arc evaporated TiAlN deposited on high speed steel, cemented carbide and polycrystalline cubic boron nitride. Post-test characterization of the scratched samples using optical profilometry, scanning electron microscopy and energy dispersive X-ray spectroscopy were performed and the cohesive and adhesive surface failure mechanisms are described and related to the substrate material properties. The results clearly show that, although all substrate materials can be regarded as hard, they result in completely different coating failure mechanisms at the normal load corresponding to substrate exposure. Also, coating failure resulting in substrate exposure does not necessarily correspond to interfacial cracking resulting in adhesive fracture along the coating-substrate interface.

  • 228.
    Sveen, Susanne
    et al.
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik. Linköpings Universitet.
    M’Sauobi, R
    Seco Tools.
    Bexell, Ulf
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Olsson, Mikael
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    PCBN hard turning of ball bearing steel: Influence of PVD coating deposition on tool wear and surface finish/surface integrity of machined surfaceManuskript (preprint) (Annet vitenskapelig)
  • 229.
    Svensson, Jennie
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik. KTH, Tillämpad processmetallurgi.
    An Experimental Study to Improve the Casting Performance of Steel Grades Sensitive for Clogging2017Doktoravhandling, med artikler (Annet vitenskapelig)
    Abstract [en]

    In this study, the goal is to optimize the process and to reduce the clogging tendency during the continuous casting process. The focus is on clogging when the refractory base material (RBM) in the SEN is in contact with the liquid steel. It is difficult or impossible to avoid non-metallic inclusions in the liquid steel, but by a selection of a good RBM in the SEN clogging can be reduced.

     

    Different process steps were evaluated during the casting process in order to reduce the clogging tendency. First, the preheating of the SEN was studied. The results showed that the SEN can be decarburized during the preheating process. In addition, decarburization of SEN causes a larger risk for clogging. Two types of plasma coatings were implemented to protect the RBM, to prevent reactions with the RBM, and to reduce the clogging tendency. Calcium titanate (CaTiO3) mixed with yttria stabilized zirconia (YSZ) plasma coatings were tested in laboratory and pilot plant trials, for casting of aluminium-killed low-carbon steels. For casting of cerium alloyed stainless steels, YSZ plasma coatings were tested in laboratory, pilot plant and industrial trials. The results showed that the clogging tendency was reduced when implementing both coating materials.

     

    It is also of importance to produce clean steel in order to reduce clogging. Therefore, the steel cleanliness in the tundish was studied experimentally. The result showed that inclusions originated from the slag, deoxidation products and tundish refractory and that they were present in the tundish as well as in the final steel product.

  • 230.
    Svensson, Jennie
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik. KTH, Tillämpad processmetallurgi.
    The submerged entry nozzle: a study of how to reduce decarburization and clogging2014Licentiatavhandling, med artikler (Annet vitenskapelig)
    Abstract [en]

    During continuous casting the submerged entry nozzle (SEN) is one of the critical points. This since sequence casting is favourable, clogging of the SEN results in fever sequences or aborted castings. In this study the preheating of SEN has been evaluated at different steel plants. This since it earlier  has been found, preheating resulted in decarburisation of  the refractory base material (RBM)  which in turn resulted in clogging of the SEN. During the industrial preheating trials it was found that decarburisation of  the SEN is possible.The decarburisation results in a higher oxygen potential near the SEN wall. This in turn makes it possible for aluminum in the molten steel to form alumina particles. For low carbon aluminum killed steel grades, accretion of alumina clusters on the SEN internal wall result in clogging which hinder or reduces the steel flow through the SEN. For this reason, laboratory trials were performed to establish the formation of a liquid phase. Thus simulating the formation of liquid inclusions when alumina clusters attaches to the SEN wall, and which can be washed away by the steel flow. Formation of a liquid phase was indicated at the temperatures 1550-1600°C, and plasma coated nozzles were tried in pilot plant trials. The coating contained of 5-9 pct, 99.9 pct pure, calcium titanate (CaTiO3) mixed with yttria stabilized zirconia (YSZ).

  • 231.
    Svensson, Jennie
    et al.
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Larsson, F.
    Memarpour, A.
    Ekerot, S.
    Brabie, Voicu
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Jönsson, P.G.
    Implementation of an YSZ coating material to prevent clogging of the submerged entry nozzle (SEN) during continuous casting of Ce-treated steels2018Inngår i: Ironmaking & steelmaking, ISSN 0301-9233, E-ISSN 1743-2812, Vol. 45, nr 2, s. 105-113Artikkel i tidsskrift (Annet vitenskapelig)
    Abstract [en]

    The possibility to reduce clogging in the submerged entry nozzle (SEN) during continuous casting of Ce alloyed stainless steels has been studied. This was done by implementing a new plasma coating material, consisting of yttria stabilized zirconia (YSZ). The coating was first tested in pilot-plant trials; where the amount of steel teemed through the plasma coated nozzles was monitored. Thereafter, samples of the coatings from the nozzles were studied using a FEG-SEM equipped with EDS. In addition, the coating material was tested in industrial trials where the performance was judged with respect to the clogging tendency detected as the movement of the stopper rod. The results from both the pilot-plant trials and industrial trials showed that the use of an YSZ coating led to a decreased clogging tendency during the casting in comparison to when using an uncoated SEN. Specifically, the pilot-plant trials showed that the clogging factor was lowered when implementing the YSZ coatings. Furthermore, the industrial trials showed that the clogging tendency, measured by the stopper rod movements, were lower when implementing the YSZ coating.

  • 232.
    Svensson, Jennie
    et al.
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Larsson, Fredrik
    Outokumpu, Avesta SE-774 22, Sweden.
    Memarpour, Arashk
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik. Sandvik Materials Technology, Sandviken SE-811 81, Sweden.
    Brabie, Voicu
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Jönsson, Pär
    Royal Institute of Technology, Brinellvägen 23, Stockholm SE-100 44, Sweden.
    Post-mortem Studies of Submerged Entry Nozzles (SEN) Coated with Yttria Stabilized Zirconia (YSZ)2015Inngår i: The 6th International Congress on the Science and Technology of Steelmaking (ICS2015), China, May 12-14, 2015 in Beijing / [ed] Organized by The Chinese Society for Metals (CSM), 2015Konferansepaper (Fagfellevurdert)
    Abstract [en]

    During continuous casting of Ce-treated stainless steel grades an accumulation of inclusions at the submerged entry nozzle’s (SEN) internal wall can cause disturbances or even prevent the molten steel flow. Plasma sprayed yttria stabilized zirconia (YSZ) coating of the SEN’s inlet and stopper rod have been implemented in order to decrease the clogging effect. The coating thickness was 210 µm and the plant trials were conducted during continuous casting of slabs. The clogging tendency was measured by the stopper rod position during the casting process. The results of the measured positions were then compared to experimentally determined information from samples cut out from the SEN’s inlet after casting. Specifically, the samples were analysed using a field emission gun scanning electron microscope (FEG-SEM) equipped with an energy dispersive X-ray spectrometry (EDS). Sample with the dimensions of ̴15x10x5 mm were electrolytic extracted before analysis. The chemical composition at the interface between the solidified steel and refractory base materials were analysed, and traces of the YSZ coating were determined.

    The movement of the stopper position indicated that the clogging tendency was reduced for the coated SEN. However, the FEG-SEM analyses showed that clogging of the SEN had occurred during the casting.

  • 233.
    Svensson, Jennie
    et al.
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik. KTH.
    Memarpour, Arashk
    Brabie, Voicu
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik. KTH.
    Jönsson, Pär
    KTH.
    Studies of the decarburisation phenomena during preheating of submerged entry nozzles (SEN) in continuous casting processes2017Inngår i: Ironmaking & steelmaking, ISSN 0301-9233, E-ISSN 1743-2812, Vol. 44, nr 2, s. 108-116Artikkel i tidsskrift (Fagfellevurdert)
    Abstract [en]

    Decarburisation of the submerged entry nozzles (SEN) during the preheating process wasinvestigated based on plant trials and thermodynamic modelling at three different steel plants.During the trials the preheating processes were mapped, the temperature profiles wereregistered and post-mortem studies of the SENs with scanning electron microscopy wereperformed. Typically, the glass/silicon powder will form a dense and protective layer inside theSEN when heated over 1100°C. However, this study found that the temperature distributioninside the SEN did not always reach this critical temperature. Thus, decarburisation of the SENwas found at all steel plants. The overall results illustrate that the control of the preheatingprocess needs to be improved at all steel plants. It is suggested that future research should befocused on the development of new coating materials to prevent decarburisation of therefractory base material, which would decrease the chances of clogging during casting.

  • 234.
    Svensson, Jennie
    et al.
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik. KTH, Tillämpad processmetallurgi.
    Memarpour, Arashk
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Brabie, Voicu
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Jönsson, Pär
    KTH, Tillämpad processmetallurgi.
    Studies of the decarburization phenomena during heating of submerged entry nozzles (SEN) in continuous casting processesManuskript (preprint) (Annet vitenskapelig)
  • 235.
    Svensson, Jennie
    et al.
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Memarpour, Arashk
    Ekerot, Sven
    Brabie, Voicu
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Jönsson, Pär
    Tillämpad processmetallurgi, KTH.
    Studies of new coating materials to prevent clogging of the submerged entry nozzle (SEN) during continuous casting of Al killed low carbon steels2017Inngår i: Ironmaking & steelmaking, ISSN 0301-9233, E-ISSN 1743-2812, Vol. 44, nr 2, s. 117-127Artikkel i tidsskrift (Fagfellevurdert)
    Abstract [en]

    The possibility to reduce clogging in the submerged entry nozzle (SEN) when casting Al killed low carbon steel has been evaluated. The coating materials have been tested in laboratory trials and pilot plant trials. Totally, 2 mixes of the coating material has been tested; containing 4.8 and 9.1 % CaTiO3 mixed with yttria stabilised zirconia (YSZ) powder. The chemical composition was analysed by using an FEG-SEM equipped with EDS.The major result showed that alumina reacted with CaTiO3 in the temperature interval from 1550-1600°C. In addition, the clogging ratio showed a decreased clogging tendency for coated nozzles compared to standard nozzles. Also, the results showed that an approximately three times higher steel mass could be teemed through the coated nozzles before clogging occurred compared to trials with uncoated standard nozzles. Overall, it is concluded that plasma sprayed CaTiO3 coatings can reduce the clogging tendency during the continuous casting process.

  • 236.
    Tahir, Mohammed
    Högskolan Dalarna, Akademin Industri och samhälle, Materialvetenskap.
    LOWWEAR varmvalsning WP12012Inngår i: Strategiskt stålforskningsprogram för Sverige 2007–2012: En sammanfattning av forskningsprogrammet och de ingående projekten, presenterade vid Jernkontorets programkonferens, 4–5 september 2012, Stockholm: Jernkontoret , 2012, s. 18-18Konferansepaper (Annet (populærvitenskap, debatt, mm))
    Abstract [sv]

    En konstruktion av slitage och temperaturprofiler in-line¬mätare designades och ett modifierat valslitage beräkningsmodell presenteras där inflytandet från arbetsvalsmaterial och det valsade materialets egen-skaper utvärderades. HSS, HiCr och IC arbetsvalsar utvärderades. Olika par i färdigverk med olika valsar-rangemang, skillnader i slitage mellan övre och undre valsar och påverkan av smörjning undersöktes.  Genom att anpassa modellen till olika valsningsförhållanden; varmvalsverk, plåtverk och steckelverk, erhölls möjligheten att undersöka modellen i drift.

    En studie av valsmaterial (Vancron 40, Sverker 3 and Vanadis 23) med avseende på valsslitage, ytkvalitet och påkladdning genomfördes. Valsmaterialen utvärderades experimentellt i laboratorium och i pilotvals-verk. Fyra olika industriella smörjmedel utvärderades. Vancron 40 gav lovande materialkvalitet tack vare sina goda egenskaper gällande ytfinhet i kombination med motstånd mot påkladdning och motstånd mot adhesiv nötning.

  • 237.
    Tahir, Mohammed
    et al.
    Högskolan Dalarna, Akademin Industri och samhälle, Materialvetenskap.
    Absalyamova, V.
    The use of solar energy in steel industries2011Konferansepaper (Fagfellevurdert)
    Abstract [en]

    The purpose of this study is to make a design and simulation of the solar photovoltaic system which would attempt to cover the energy demand of the initial part of the pickling line hydraulic system at the SSAB steel plant. Proposed photovoltaic pumping systems in this work are to run the system into the hydraulic pump directly, developing of PV systems which produce energy in DC form. The second proposed photovoltaic technology is a type of PV system which delivers power to an AC load. © 2011 IEEE.

  • 238.
    Tahir, Mohammed
    et al.
    Högskolan Dalarna, Akademin Industri och samhälle, Materialvetenskap.
    Holmberg, Jesper
    Högskolan Dalarna, Akademin Industri och samhälle, Materialvetenskap.
    The impact of tapered work rolls in the finishing mill during hot rolling2012Inngår i: Iron & Steel Technology Conference Proceedings, Warrendale, PA: Association for Iron & Steel Technology , 2012, s. 1601-1609Konferansepaper (Fagfellevurdert)
    Abstract [en]

    Few studies were done to assess the knowledge of the impact of tapered work rolls in the finishing mill during hot rolling. Hansson, L.et al. studied the use of advanced process models for plate and strip rolling in the Scandinavian Steel Industry [1]. Their work thatincludes simulations of work roll shift with tapered and CVC rolls have results a basis for new investments for profile and flatnesscontrol equipment in steel rolling mills. Rosenthal D. et al. studied a method of influencing the strip contour in the edge region of arolled strip [2]. Special CVC rolls were used as work rolls for influencing the strip contour in the edge areas and to study.Concerning this project, early analysis of work roll data suggested that the tapering of the work rolls was subordinated to the CVCprofileand that a greater than allowed tapering would not affect the result of the rolling process. A grinded profile which is out oftolerance on the other hand, would result in a change in CVC-profile.The purpose of this project was to study the impact of the tapering on the work rolls during hot rolling in the finishing mill. Customgrinded work rolls of CVC-type have been placed in finishing mill, stand 6 (F6) and the axial loads during the following rolling hasbeen studied and evaluated. The deviation of the centre of a strip, flatness of a strip as well as the equivalent camber of the work rollshave also been analyzed for further evaluations of the impact on the rolling results.Theoretically calculation model of the profile of the CVC work rolls and axial force directed toward roll edges was described. Customgrinded work rolls of CVC-type have been placed in mill stand number 6 and the axial loads during the following rolling has beenstudied and evaluated.The impact of tapered work rolls towards CVC profile, axial force, the deviation of the centre of a strip and flatness was presented.The work project finally resulted in new guidelines in grinding of the work rolls in the finishing mill.The work is done in the finishing mill of the strip rolling mill, Figure 1. The strip rolling mill comprising six-high rolling stands wherework rolls and backup rolls at stand 2 to 6 are containing CVC work rolls.Data of the specific strip rolling mill, the type and the characteristics of the used work rolls and strip properties were described [3].Due to different rolling conditions; high temperature in the early stands (thermal cracks) and low temperature and high incident rate inthe last stands (mechanical damage), HSS and HCr rolls were used in stands F1-F3 and IC rolls in stands F4-F6. The studied work rollwas of IC type.

  • 239.
    Tahir, Mohammed
    et al.
    Högskolan Dalarna, Akademin Industri och samhälle, Materialvetenskap.
    Jonsson, N.G.
    Lagergren, J
    Wikström, L.
    Hedenlund, H
    Evaluation of tool material Vancron 40 with regard to wear, surface quality and galling2012Inngår i: Proceedings of  JSI 2012 - 30th International Steel Industry Conference, December 18-19, Paris, France, Paris: B&W , 2012, , s. 2Konferansepaper (Fagfellevurdert)
    Abstract [en]

    Resistance to adhesive wear on tool material can be improved by increasing the tool hardness, high ductility and decreasing of friction coefficient between the tool and the work material. In a similar way, resistance to galling can be increased by increasing the tool hardness and decreasing of friction. The purpose of this project was to investigate the use of Vancron 40 as work rolls in cold rolling of stainless steel in cluster rolling mills. Considerable factors were among others, the influence of different industrial lubricants, minimizing of temperature rising during rolling, lowering of rolling forces, longer life of rolls, easier grinding of rolls, increase the oil film bearing at normal cold rolling conditions and improving surface roughness of the final products.

    For using of work rolls in cold rolling cluster mills, roll material Vancron 40 was evaluated with regard to roll wear, surface quality and galling. Currently used roll type ASP23 was used as reference roll in the evaluation. The experiments were performed, as much as possible, in accordance to steel industries recommendations. The experiments were conducted with a 4-high pilot rolling mill at Swerea MEFOS in Luleå which is equipped for rolling of both flat and long products. The experiment was done for different industrial mineral-based lubricants. Lubrication was applied in a controlled form to the upper and lower work rolls and in the contact zone. To achieve the proposed final thickness, five passes were rolled. The characteristic of the upper and the lower work rolls, during rolling, was also examined. The pilot experimental results gave promising result in surface roughness, galling and roll material hardness. Due to its chemical and physical properties, Vancron 40 is believed to be the best solution to resist adhesive wear and galling in cold rolling process that require higher accuracy. 

  • 240. Thirathipviwat, P.
    et al.
    Song, G.
    Jayamani, Jayaraj
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Bednarcik, J.
    Wendrock, H.
    Gemming, T.
    Freudenberger, J.
    Nielsch, K.
    Han, J.
    A comparison study of dislocation density, recrystallization and grain growth among nickel, FeNiCo ternary alloy and FeNiCoCrMn high entropy alloy2019Inngår i: Journal of Alloys and Compounds, ISSN 0925-8388, E-ISSN 1873-4669, Vol. 790, s. 266-273Artikkel i tidsskrift (Fagfellevurdert)
    Abstract [en]

    The microstructural evolutions in terms of dislocation density, annealing twin density as well as with respect to microstructural changes due to recrystallization and grain growth were investigated in pure Ni, equiatomic FeNiCo alloy, and FeNiCoCrMn high entropy alloy (HEA) during the thermomechanical process. All samples were single phase and showed a face-centered cubic (FCC) lattice structure. This was maintained during thermomechanical processing comprising of cold swaging by 85% reduction of cross-sectional area and subsequent annealing at 800 °C. The level of dislocation accumulation during cold swaging increased with the number of constituent elements. The FeNiCoCrMn HEA obtained the highest dislocation density, followed by the FeNiCo and Ni, respectively. After the annealing at 800 °C for 0.5 h, all samples achieved the large fraction of recrystallized grains with minor fraction of substructured grains and no deformed grain. The FeNiCoCrMn HEA obtained the smallest recrystallized grain size (∼5 μm) after the annealing at 800 °C for 0.5 h. This could be a result of the highest dislocation density generated during cold swaging prior to the annealing. The prolonged annealing at 800 °C for up to 24 h led to a grain growth for all the samples, however, at different growth rates. The FeNiCoCrMn HEA revealed the lowest rate of grain growth, but the microstructural changes during the annealing were not significantly different between the FeNiCo and Ni samples. Besides the effect of the number of constituent elements, the type and the combination of constituent elements have an effect on the microstructural evolution during the annealing.

  • 241.
    Tunell, Helena
    et al.
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Osterman, Jesper
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Selo, Muhammed
    POLY 701-Photoinduced reorientation and LC alignment of novel azobenzene containing polymers2006Inngår i: Abstract of Papers of the American Chemical Society, ISSN 0065-7727, Vol. 232Artikkel i tidsskrift (Annet vitenskapelig)
  • 242.
    Tunell, Helena
    et al.
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Selo, Muhammed
    Skarp, Kent
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Hilborn, Johns
    Synthesis and characterization of main chain polyimides containing chalcone derivatives for LC alignment2006Inngår i: Polymer journal, ISSN 0032-3896, E-ISSN 1349-0540, Vol. 38, nr 7, s. 716-723Artikkel i tidsskrift (Fagfellevurdert)
    Abstract [en]

    Two soluble polyimides containing chalcone derivatives in the main chains were successfully prepared using the Mitsunobu reaction at room temperature, reacting diols with diimides. With this reaction procedure the high temperature imidization step normally needed for the synthesis of polyimides is avoided and the polymers can be used for temperature sensitive applications. The main chain polyimides were characterized with FT-IR, NMR and DSC and the extent of the photoreaction was measured with FT-IR and UV-vis spectroscopy. Isobestic points were observed in the absorption spectral changes at the early stage of UV irradiation as a result of a single photochemical process. Further photoirradiation is accompanied by deviation from the isobestic points, implying that another photochemical process has started. With FT-IR investigations it was concluded that photodimerization is the process occurring at low UV exposure doses and that trans-cis isomerization is starting simultaneously at higher doses. The optical anisotropic properties were investigated upon exposure of the polymers as thin films to linearly polarized UV (LPUV) light of different doses. Selected crosslinking in the parallel direction relative to the direction of the LPUV light and subsequent optical anisotropy in the film were achieved.

  • 243.
    Vainikainen, Kalevi
    Högskolan Dalarna, Akademin Industri och samhälle, Materialvetenskap.
    Undersökning av sprickors uppträdande och beteende vid valsning av rostfri tråd;: Investigation of Surface Cracks Behaviour in Wire Rod Rolling of Stainless Steel2006Independent thesis Advanced level (degree of Master (Two Years))Oppgave
    Abstract [sv]

    Marknaden ställer allt högre krav på rostfri valstråd samtidigt som många stålsorter är komplicerade att tillverka. Defekter av olika slag får inte förekomma på kallstukningstråd, fjädertråd och på tråd för andra krävande applikationer. Sprickor som är svåra att upptäcka kan hamna hos kunden, vilket leder till reklamationer. Därmed undersöktes sprickors beteende under valsning genom hela valsverket. Ämnen i olika stålsorter preparerades med längsgående sprickor, värmdes i förvärmningsugnen och valsades till tråd i dimensionen Ø 5,6 mm. Prover togs ut vid befintliga saxar och på färdig tråd. En undersökning gjordes även på en repa som introducerades i början av den kontinuerliga mellansträckan, prover togs ut på samma sätt som för sprickor. Efter provberedning mättes sprickorna med hjälp av ljusmikroskop och analyserades i SEM. Sedan redovisades sprickdjupet genom hela valsverket som ett relativt sprickdjup. Resultaten visade att i de första sticken påverkade formen på sprickan och repan sprickdjupet markant, placeringen i spåret hade också en betydelse. Det kunde konstateras att en ökad sprickbredd med innesluten oxid påverkade sprickdjupet negativt. Sprickdjupet påverkades även av stålets analys. Slutligen kunde konstateras att två av stålsorterna var känsligare för sprickor och att de preparerade sprickorna och den introducerade repan inte kunde elimineras för någon av stålsorterna.

  • 244.
    Valyukh, Iryna
    et al.
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Arwin, Hans
    Chigrinov, Vladimir
    Valyukh, Sergiy
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Characterization of the photo-alignment material SD-1/SDA-2 with spectroscopic ellipsometry2007Inngår i: IDW '07: Proceedings of the 14th International Display Workshops, vols 1-3, 2007, Vol. 1-3, s. 391-394Konferansepaper (Fagfellevurdert)
    Abstract [en]

    Variable angle spectroscopic ellipsometry (VASE) is applied for investigation of the azo-dye SD-1/SDA-2 which are used for photoalignment of liquid crystals. The azo-dye was spin coated on silicon substrates. Samples as prepared as well as samples illuminated with polarized UV light were studied. The measured optical constants were modelled with an ensemble of the Lorentz oscillators. The results confirm the reorientation mechanism of the photo-induced order formation in the azo-dye films under the action of polarized light, and also show that there exist some photochemical processes.

  • 245.
    Valyukh, Iryna
    et al.
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Arwin, Hans
    Chigrinov, Vladimir
    Valyukh, Sergiy
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    UV-induced in-plane anisotropy in layers of mixture of the azo-dyes SD-1/SDA-2 characterized by spectroscopic ellipsometry2008Inngår i: Physica Status Solidi C - Current topics in solid state physics, vol.5, no.5, 2008, Vol. 5, nr 5, s. 1274-1277Konferansepaper (Fagfellevurdert)
    Abstract [en]

    The optical properties of the azo-dyes SD-1/SDA-2, which are used for photoaligning of liquid crystals (LCs), are investigated with Variable Angle Spectroscopic Ellipsometry (VASE). Films of mixture of SD-1/SDA-2 are deposited by spin coating on silicon wafers. The estimated thickness is approximately 10 nm. To achieve photo-induced anisotropy, one of the samples is illuminated during 15 minutes with linearly polarized UV light followed by thermal stabilization during 1 hour at 150 degrees C. VASE measurements are performed in the wavelength range 200-1350 rim at several angles of incidence and at different sample orientations. Dielectric functions of azo-dye films without/with polarized UV light illumination were modelled using an ensemble of Lorentz oscillators. The results confirm the diffusion model proposed recently for explanation of the formation of the photo-induced order in azo-dye films under the action of polarized light. Refractive indices, their wavelength dispersion and thicknesses of films of SD-1/SDA-2 are reported here.

  • 246.
    Valyukh, Iryna
    et al.
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Green, S.
    Arwin, H.
    Niklasson, G. A.
    Wäckelgård, Ewa
    Högskolan Dalarna, Akademin Industri och samhälle, Energi och miljöteknik.
    Granqvist, C. G.
    Spectroscopic ellipsometry characterization of electrochromic tungsten oxide and nickel oxide thin films made by sputter deposition2010Inngår i: Solar Energy Materials and Solar Cells, ISSN 0927-0248, E-ISSN 1879-3398, Vol. 94, nr 5, s. 724-732Artikkel i tidsskrift (Fagfellevurdert)
    Abstract [en]

    Electrochromic films of tungsten oxide and nickel oxide were made by reactive dc magnetron sputtering and were characterized by X-ray diffraction, Rutherford backscattering spectrometry, scanning electron microscopy, and atomic force microscopy. The optical properties were investigated in detail by spectroscopic ellipsometry and spectrophotometry, using a multiple-sample approach. The W-oxide film was modeled as a homogeneous isotropic layer, whereas the Ni-oxide film was modeled as an anisotropic layer with the optical axis perpendicular to the surface. Parametric models of the two layers were then used to derive complex refractive index in the 300-1700 nm range, film thickness, and surface roughness. A band gap of 3.15 eV was found for the W-oxide film, using a Tauc-Lorentz parameterization. For the Ni-oxide film, taken to have direct optical transitions, band gaps along the optical axis, perpendicular to it, and in an isotropic intermediate layer at the bottom of the film were found to be 3.95, 3.97, and 3.63 eV, respectively. Parameterization for the Ni oxide was made by use of the Lorentz model. (C) 2009 Elsevier B.V. All rights reserved.

  • 247.
    Valyukh, Iryna
    et al.
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Slobodyanyuk, A
    Valyukh, S
    Osterman, Jesper
    Högskolan Dalarna, Akademin Industri och samhälle, Materialvetenskap.
    Skarp, Kent
    Högskolan Dalarna, Akademin Industri och samhälle, Materialvetenskap.
    Using the Jones matrix for simulation of light propagation in anisotropic media2003Inngår i: Journal of optical technology (Print), ISSN 1070-9762, E-ISSN 1091-0786, Vol. 70, nr 7, s. 470-473Artikkel i tidsskrift (Fagfellevurdert)
  • 248.
    Valyukh, Iryna
    et al.
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Slobodyanyuk, A.
    Valyukh, S.
    Sorokin, V.
    Osterman, Jesper
    Högskolan Dalarna, Akademin Industri och samhälle, Materialvetenskap.
    Skarp, Kent
    Högskolan Dalarna, Akademin Industri och samhälle, Materialvetenskap.
    On accuracy of the Jones matrix method for simulation of light propagation in twisted nematic liquid crystals2002Inngår i: Proc. of the 11th Int. Symp. Advanced Display Technologies, UkraineArtikkel i tidsskrift (Fagfellevurdert)
  • 249.
    Valyukh, Iryna
    et al.
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Slobodyanyuk, A.
    Valyukh, S.
    Sorokin, V.
    Osterman, Jesper
    Högskolan Dalarna, Akademin Industri och samhälle, Materialvetenskap.
    Skarp, Kent
    Högskolan Dalarna, Akademin Industri och samhälle, Materialvetenskap.
    Simulation of light scattered by reflective polarizer with a rough metallic surface2002Inngår i: Eurodisplay 2002, Nice, France, 2002Konferansepaper (Fagfellevurdert)
  • 250.
    Valyukh, Iryna
    et al.
    Högskolan Dalarna, Akademin Industri och samhälle, Materialteknik.
    Valyukh, S.
    Skarp, Kent
    Högskolan Dalarna, Akademin Industri och samhälle, Materialvetenskap.
    Theoretical study of the optical properties of low voltage stacked cholesteric liquid-crystal displays2004Inngår i: Asia display, 2004Konferansepaper (Fagfellevurdert)
23456 201 - 250 of 287
RefereraExporteraLink til resultatlisten
Permanent link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • chicago-author-date
  • chicago-note-bibliography
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf