Dalarna University's logo and link to the university's website

du.sePublications
Change search
Refine search result
6789 401 - 419 of 419
CiteExportLink to result list
Permanent link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • chicago-author-date
  • chicago-note-bibliography
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf
Rows per page
  • 5
  • 10
  • 20
  • 50
  • 100
  • 250
Sort
  • Standard (Relevance)
  • Author A-Ö
  • Author Ö-A
  • Title A-Ö
  • Title Ö-A
  • Publication type A-Ö
  • Publication type Ö-A
  • Issued (Oldest first)
  • Issued (Newest first)
  • Created (Oldest first)
  • Created (Newest first)
  • Last updated (Oldest first)
  • Last updated (Newest first)
  • Disputation date (earliest first)
  • Disputation date (latest first)
  • Standard (Relevance)
  • Author A-Ö
  • Author Ö-A
  • Title A-Ö
  • Title Ö-A
  • Publication type A-Ö
  • Publication type Ö-A
  • Issued (Oldest first)
  • Issued (Newest first)
  • Created (Oldest first)
  • Created (Newest first)
  • Last updated (Oldest first)
  • Last updated (Newest first)
  • Disputation date (earliest first)
  • Disputation date (latest first)
Select
The maximal number of hits you can export is 250. When you want to export more records please use the Create feeds function.
  • 401.
    Westlund, V.
    et al.
    Uppsala Univ, Angstrom Tribomat Grp, Box 534, S-75121 Uppsala, Sweden..
    Heinrichs, J.
    Uppsala Univ, Angstrom Tribomat Grp, Box 534, S-75121 Uppsala, Sweden..
    Olsson, Mikael
    Dalarna University, School of Technology and Business Studies, Materials Technology. Uppsala Univ, Angstrom Tribomat Grp, Box 534, S-75121 Uppsala, Sweden.
    Jacobson, S.
    Uppsala Univ, Angstrom Tribomat Grp, Box 534, S-75121 Uppsala, Sweden..
    Investigation of material transfer in sliding friction-topography or surface chemistry?2016In: Tribology International, ISSN 0301-679X, E-ISSN 1879-2464, Vol. 100, p. 213-223Article in journal (Refereed)
    Abstract [en]

    To differentiate between the roles of surface topography and chemical composition on influencing friction and transfer in sliding contact, a series of tests were performed in situ in an SEM. The initial sliding during metal forming was investigated, using an aluminum tip representing the work material, put into sliding contact with a polished flat tool material. Both DLC-coated and uncoated tool steel was used. By varying the final polishing step of the tool material, different surface topographies were obtained. The study demonstrates the strong influence from nano topography of an unpolished DLC coated surface on both coefficient of friction and material transfer. The influence of tool surface chemistry is also discussed.

    Download full text (pdf)
    fulltext
  • 402.
    Wiklund, Urban
    et al.
    Uppsala University.
    Olsson, Mikael
    Dalarna University, School of Technology and Business Studies, Materials Technology.
    Jacobson, Staffan
    Uppsala University.
    Degradation mechanisms of matrix steel in rock drill bits2016In: Proceedings of the 17th Nordic Symposium on Tribology - Nordtrib 2016, 2016Conference paper (Refereed)
  • 403. Wikström, Lars
    et al.
    Bexell, Ulf
    Dalarna University, School of Technology and Business Studies, Materials Technology.
    Lindgren, Michael
    Dalarna University, School of Technology and Business Studies, Materials Technology.
    Partial annealing of stainless steel before roll forming2007In: Stål 2007, 2007Conference paper (Other academic)
  • 404. Yaxuan, X.
    et al.
    Huixiang, W.
    Yuting, W.
    Jinhua, Z.
    Haimeng, L.
    Qian, X.
    Zhang, Xingxing
    Dalarna University, School of Information and Engineering, Energy Technology.
    Chuan, L.
    Yulong, D.
    Carbide slag based shape-stable phase change materials for waste recycling and thermal energy storage2022In: Journal of Energy Storage, ISSN 2352-152X, E-ISSN 2352-1538, Vol. 50, article id 104256Article in journal (Refereed)
    Abstract [en]

    Massive accumulation of industrial carbide slag tend to cause ecological environment pollution and greenhouse gas emission. This innovative work proposed to fabricate shape-stable phase change materials (SSPCMs) with carbide slag to utilise industrial solid waste and protect precious natural resources. Seven SSPCMs were fabricated with different mass ratios of industrial carbide slag to sodium nitrate by cold-compression hot-sintering method, and key performance was investigated on the SSPCMs. Results showed that the SSPCM (sample CC6) with the mass ratio of 5:5 of carbide slag to sodium nitrate presented the best performance: sample CC6 achieved a high thermal energy storage density of 447 J/g in the range of 100–400 °C and reached a mechanical strength of 73.6 MPa; sample CC6 demonstrated a good thermal stability and chemical compatibility between carbide slag and sodium nitrate during the heating/cooling cycles; the thermal conductivity of sample CC6 was 0.93 W/(m•K), and elements distributed uniformly in sample CC6. © 2022

  • 405.
    Yvell, Karin
    Dalarna University, School of Technology and Business Studies, Materials Technology. KTH, Materialvetenskap.
    Experimental Studies of Deformation Structures in Stainless Steels using EBSD2018Doctoral thesis, comprehensive summary (Other academic)
    Abstract [en]

    In this thesis, the focus has been the study of deformation structures in stainless steels by using electron backscatter diffraction (EBSD). Via increased knowledge of the evolution of the substructure during deformation, the design and control of the manufacturing process can be improved.

    A relation was found between the active deformation mechanisms, the evolution of low angle boundaries (LABs) and the strain hardening rate. When deformation twinning was an active deformation mechanism in an austenitic stainless steel with lower stacking fault energy (SFE), the strain hardening rate was maintained up to large strains due to formation of LABs. The deformation twin boundaries acted as new obstacles for dislocation slip which in turn increased the formation of LABs even further. During deformation by slip in an austenitic stainless steel with a higher SFE, the strain hardening rate instead decreased when LABs were formed. A high value of SFE promotes dislocation cross slip which in turn increases annihilation of dislocations leading to a minor increase in LAB formation.

    Deformation structures formed in surface grains during in situ tensile tests were found to develop at lower strains than in bulk grains obtained from interrupted conventional tensile tests. This behavior is consistent with the fact that dislocations sources and deformation twinning operate at approximately half the stress on a free surface as compared to the bulk.

    The deformation structures were quantified by measuring size distributions for entities bounded by LABs and high angle boundaries (HABs). The size distributions were found to be well described by bimodal lognormal distribution functions. The average size for the distribution of small grains and subgrains correlated well with the mean free distance of dislocation slip and to the strain hardening.

    Download full text (pdf)
    FULLTEXT01
  • 406.
    Yvell, Karin
    et al.
    Dalarna University, School of Technology and Business Studies, Materials Technology. KTH, Materialvetenskap.
    Engberg, Göran
    Dalarna University, School of Technology and Business Studies, Materials Technology.
    Deformation structures in a duplex stainless steel2018In: Materials Science Forum, ISSN 0255-5476, E-ISSN 1662-9752, Vol. 941, p. 176-181Article in journal (Refereed)
    Abstract [en]

    The evolution of the deformation structure with strain has been studied using electron backscatter diffraction (EBSD). Samples from interrupted uniaxial tensile tests and from a cyclic tension/compression test were investigated. The evolution of low angle boundaries (LABs) was studied using boundary maps and by measuring the LAB density. From calculations of local misorientations, smaller orientation changes in the substructure can be illustrated. The different orientations developed with strain within a grain, due to operation of different slip systems in different parts of the grain, were studied using a misorientation profile showing substantial orientation changes after a true strain of 0.24. The texture evolution with increasing strain was followed by using inverse pole figures (IPFs). The observed substructure development in the ferritic and austenitic phases could be successfully correlated with the stress-strain curve from a tensile test. LABs were first observed in the different phases when the strain hardening rate changed in appearance indicating that cross slip started to operate as a significant dislocation recovery mechanism. The evolution of the deformation structure is concluded to occur in a similar manner in the austenitic and ferritic phases but with different texture evolution for the two phases.

  • 407.
    Yvell, Karin
    et al.
    Dalarna University, School of Technology and Business Studies, Materials Technology.
    Engberg, Göran
    Dalarna University, School of Technology and Business Studies, Materials Technology.
    Microstructure evolution in an austenitic stainless steel during wire rolling2013In: Materials Science Forum, ISSN 0255-5476, E-ISSN 1662-9752, Vol. 753, p. 407-410Article in journal (Refereed)
    Abstract [en]

    Material characterization is of great importance for example to improve and further develop physically based models for predicting the microstructural evolution in steels during and after hot deformation. The aim of this study was to characterize the microstructure evolution during wire rod rolling of an austenitic stainless steel of type AISI 304L in a wire rod block, consisting of eight pairs of rolls, using electron backscatter diffraction. The investigation showed that the grain size in the center of the bar decreases during the first four passes. The grain size decrease from 6.5 Όm after the first roll pass down to 2 Όm, and only small changes was measured in the overall grain size during the last four passes. The subgrain size adopts an almost constant size of 0.9 Όm from the second until the fifth roll pass. During the first 3 passes almost no recrystallization is observed and strain accumulates. Partial recrystallization then starts and for the last 3 passes the recrystallization is almost complete and the texture is nearly random. © (2013) Trans Tech Publications, Switzerland.

  • 408.
    Yvell, Karin
    et al.
    Dalarna University, School of Technology and Business Studies, Materials Technology.
    Grehk, T. M.
    Engberg, Göran
    Dalarna University, School of Technology and Business Studies, Materials Technology.
    Microstructure characterization of 316L deformed at high strain rates using EBSD2016In: Materials Characterization, ISSN 1044-5803, E-ISSN 1873-4189, Vol. 122, p. 14-21Article in journal (Refereed)
    Abstract [en]

    Specimens from split Hopkinson pressure bar experiments, at strain rates between ~ 1000–9000 s− 1 at room temperature and 500 °C, have been studied using electron backscatter diffraction. No significant differences in the microstructures were observed at different strain rates, but were observed for different strains and temperatures. Size distribution for subgrains with boundary misorientations > 2° can be described as a bimodal lognormal area distribution. The distributions were found to change due to deformation. Part of the distribution describing the large subgrains decreased while the distribution for the small subgrains increased. This is in accordance with deformation being heterogeneous and successively spreading into the undeformed part of individual grains. The variation of the average size for the small subgrain distribution varies with strain but not with strain rate in the tested interval. The mean free distance for dislocation slip, interpreted here as the average size of the distribution of small subgrains, displays a variation with plastic strain which is in accordance with the different stages in the stress-strain curves. The rate of deformation hardening in the linear hardening range is accurately calculated using the variation of the small subgrain size with strain.

    Download full text (pdf)
    fulltext
  • 409.
    Yvell, Karin
    et al.
    Dalarna University, School of Technology and Business Studies, Materials Technology.
    Grehk, T. M.
    Hedström, P.
    Borgenstam, A.
    Engberg, Göran
    Dalarna University, School of Technology and Business Studies, Materials Technology.
    EBSD analysis of surface and bulk microstructure evolution during interrupted tensile testing of a Fe-19Cr-12Ni alloy2018In: Materials Characterization, ISSN 1044-5803, E-ISSN 1873-4189, Vol. 141, p. 8-18Article in journal (Refereed)
    Abstract [en]

    Abstract The microstructure evolution in both surface and bulk grains in a pure Fe-19Cr-12Ni alloy has been analyzed using electron backscatter diffraction after tensile testing interrupted at different strains. Surface grains were studied during in situ tensile testing performed in a scanning electron microscope, whereas bulk grains were studied after conventional tensile testing. The evolution of the deformation structure in surface and bulk grains displays a strong resemblance but the strain needed to obtain a similar deformation structure is lower in the case of surface grains. Both slip and twinning are observed to be important deformation mechanisms, whereas deformation-induced martensite formation is of minor importance. Since the stacking fault energy (SFE) is low, 17mJ/m2, dynamic recovery by cross slip of un-dissociated dislocations is unfavorable. This reduces the annihilation of dislocations which in turn leads to a significant increase of low angle boundaries with increasing strain. The low SFE also favors formation of deformation twins which reduces the slip distance, leading to a hardening similar to the Hall-Petch relation. The combination of a low ability for cross-slip and a reduced slip distance caused by twinning is concluded to be the main reason for maintaining a high strain-hardening rate up to strains close to necking.

    Download full text (pdf)
    fulltext
  • 410.
    Yvell, Karin
    et al.
    Dalarna University, School of Technology and Business Studies, Materials Technology.
    Grehk, T. M.
    Hedström, P.
    Borgenstam, A.
    Engberg, Göran
    Dalarna University, School of Technology and Business Studies, Materials Technology.
    Microstructure development in a high-nickel austenitic stainless steel using EBSD during in situ tensile deformation2018In: Materials Characterization, ISSN 1044-5803, E-ISSN 1873-4189, Vol. 135, no Supplement C, p. 228-237Article in journal (Refereed)
    Abstract [en]

    Plastic deformation of surface grains has been observed by electron backscatter diffraction technique during in situ tensile testing of a high-nickel austenitic stainless steel. The evolution of low- and high-angle boundaries as well as the orientation changes within individual grains has been studied. The number of low-angle boundaries and their respective misorientation increases with increasing strain and some of them also evolve into high-angle boundaries leading to grain fragmentation. The annealing twin boundaries successively lose their integrity with increasing strain. The changes in individual grains are characterized by an increasing spread of orientations and by grains moving towards more stable orientations with 〈111〉 or 〈001〉 parallel to the tensile direction. No deformation twins were observed and deformation was assumed to be caused by dislocation slip only.

    Download full text (pdf)
    fulltext
  • 411.
    Yvell, Karin
    et al.
    Dalarna University, School of Technology and Business Studies, Materials Technology.
    Lindgren, Michael
    Bexell, Ulf
    Dalarna University, School of Technology and Business Studies, Materials Technology.
    A microstructural investigation of roll formed austenitic stainless steel2013In: Sheet metal 2013: Key engineering metals, 2013, Vol. 549, p. 364-371Conference paper (Refereed)
    Abstract [en]

    Due to high production rates and the possibility to form complex geometries roll forming has become an increasingly popular forming process for sheet metal. Increasing quantities of high strength steels are used today but can be difficult to form due to their low ductility. One way to partly overcome this problem is to heat the steel in the forming area thus locally increasing the ductility. In the present study partially heated cold rolled high strength AISI 301 type austenitic stainless steel was investigated using electron backscattered diffraction (EBSD), and the results were compared to microhardness measurements. The results show that partial heating will give an almost complete reverse martensite transformation, i.e. martensite (alpha') transforms to austenite (gamma), close to the surfaces and grain growth in the middle of the steel sheet. The extension of the heat affected zone can be determined using either microhardness or EBSD measurements. Both these measurements can be used to determine the position of the neutral layer after roll forming. The hardness measurement cannot distinguish between microstructural features but the results are in good agreement with the EBSD results for volume fraction of alpha'-martensite. A major advantage of using EBSD is the possibility to characterize and follow the microstructural development when heating and roll forming.

  • 412.
    Zhou, Nian
    Dalarna University, School of Technology and Business Studies, Materials Technology. KTH, Yt- och korrosionsvetenskap.
    Surface integrity and corrosion behavior of stainless steels after grinding operations2018Doctoral thesis, comprehensive summary (Other academic)
    Abstract [en]

    Stainless steels are widely used in applications where both the mechanical properties of steels and high corrosion resistance are required. There is continuous research to enable stainless steel components to be produced in a more economical way and be used in more harsh environments. A way to achieve this is to correlate the service performance with the production processes.

    The central theme of this thesis is surface integrity and corrosion, especially the stress corrosion cracking behavior, after grinding processes. Controlled grinding parameters, including abrasive grit size, machine power and grinding lubricant, were used and the resulting surface properties studied for austenitic 304L and duplex 2304 stainless steels. The abrasive grit size effect was found to have a larger influence. Surface defects, a highly deformed surface layer and the generation of a high level surface tensile residual stresses along the grinding direction were observed as the main types of damage. 

    The effect of grinding on stress corrosion cracking behavior of austenitic 304L, ferritic 4509 and duplex 2304 stainless steels in chloride-containing environments was also investigated.  The abrasive grit size effect on corrosion behavior for the three grades was compared. Grinding-induced surface tensile residual stress was suggested as the main factor to cause micro-cracks on the ground surface for 304L and 2304; for 4509, grinding-induced grain fragmentation was considered as the main factor for the initiation of extensive micro-pits. For duplex 2304, the microstructure and micro-notches in the as-ground surface also had significant influence. Depending on the surface conditions, the actual loading by four-point bending was found to deviate from the calculated value using the formula according to ASTM G39 by different amounts. The knowledge obtained from this work can provide guidance for choosing appropriate stainless steel grades and grinding parameters; and can also be used to help understanding the failure mechanism of ground stainless steel components during service.

    Download full text (pdf)
    FULLTEXT01
  • 413.
    Zhou, Nian
    et al.
    Dalarna University, School of Technology and Business Studies, Materials Technology. KTH.
    Lin Peng, Ru
    Linköping University.
    Pettersson, Rachel
    Jernkontoret, KTH.
    Surface characterization of austenitic stainless steel 304L after different grinding operations2017In: International Journal of Mechanical and Materials Engineering, ISSN 2198-2791, Vol. 12, no 6Article in journal (Refereed)
    Abstract [en]

    Background: The austenitic stainless steel 304L is widely used as a structural material for which the finished surface has significant effect on the service performance. A study of the grinding process with regard to the quality of the ground surfaces is therefore interesting from the point of view of both industrial application and scientific research.

    Method: This work investigates the influence of grinding parameters including abrasive grit size, machine power, and grinding lubrication on the surface integrity of the austenitic stainless steel 304L. The induced normal grinding force, grinding surface temperature, metal removal rate, and surface property changes have been investigated and compared.

    Results and Conclusion: Using grinding, lubrication significantly enhanced the metal removal rate. Surface defects (deep grooves, smearing, adhesive chips, and indentations), a highly deformed thin surface layer up to a few microns in thickness, and high surface tensile residual stresses parallel to the grinding direction have been observed as the main damage induced by the grinding operations. Surface finish and deformation were found to be improved by using smaller abrasive grits or by using lubrication during grinding. Increasing the machine power increased surface deformation while reducing surface defects. The results obtained can provide a reference for choosing appropriate grinding parameters when machining 304L; and can also help to understand the failure mechanism of ground austenitic stainless steel components during service.

    Download full text (pdf)
    fulltext
  • 414.
    Zhou, Nian
    et al.
    Dalarna University, School of Technology and Business Studies, Materials Technology. KTH.
    Lin Peng, Ru
    Linköping University.
    Pettersson, Rachel
    Jernkontoret, KTH.
    Schönning, Mikael
    Avesta Research Center - Outokumpu Stainless AB.
    Residual stress in stainless steels after surface grinding and its effect on chloride induced SCC2016In: Materials Research Proceedings: Residual Stresses 2016: ICRS-10, 2016, p. 289-294Conference paper (Refereed)
    Abstract [en]

    The induced residual stresses in stainless steels as a consequence of surface grinding as well as their influence on the chloride induced stress corrosion cracking (SCC) susceptibility have been investigated. Three types of materials were studied: 304L austenitic stainless steel, 4509 ferritic stainless steel and 2304 duplex stainless steel. Surface grinding using 60# and 180# grit size abrasives was performed for each material. Residual stress depth profiles were measured using X-ray diffraction. The susceptibility to stress corrosion cracking was evaluated in boiling MgCl2 according to ASTM G36. Specimens were exposed without applying any external loading to evaluate the risk for SCC caused solely by residual stresses. Induced residual stresses and corrosion behavior were compared between the austenitic, ferritic and duplex stainless steels to elucidate the role of the duplex structure. For all materials, the grinding operation generated tensile residual stresses in the surface along the grinding direction but compressive residual stresses perpendicular to the grinding direction. In the subsurface region, compressive stresses in both directions were present. Micro-cracks initiated due to high grinding-induced tensile residual stresses in the surface layer were observed in austenitic 304L and duplex 2304, but not in the ferritic 4509. The surface residual stresses decreased significantly after exposure for all specimens.

    Download full text (pdf)
    fulltext
  • 415.
    Zhou, Nian
    et al.
    Dalarna University, School of Technology and Business Studies, Materials Technology. KTH.
    Lin Peng, Ru
    Linköping University.
    Schönning, Mikael
    Avesta Research Center–Outokumpu Stainlelss AB.
    Pettersson, Rachel
    Jernkontoret, KTH.
    SCC of 2304 duplex stainless steel - microstructure, residual stress and surface grinding effects2017In: Materials, ISSN 1996-1944, E-ISSN 1996-1944, Vol. 10, no 3, article id 221Article in journal (Refereed)
    Abstract [en]

    The influence of surface grinding and microstructure on chloride induced stress corrosion cracking (SCC) behavior of 2304 duplex stainless steel has been investigated. Grinding operations were performed both parallel and perpendicular to the rolling direction of the material. SCC tests were conducted in boiling magnesium chloride according to ASTM G36; specimens were exposed both without external loading and with varied levels of four-point bend loading. Residual stresses were measured on selected specimens before and after exposure using the X-ray diffraction technique. In addition, in-situ surface stress measurements subjected to four-point bend loading were performed to evaluate the deviation between the actual applied loading and the calculated values according to ASTM G39. Micro-cracks, initiated by grinding induced surface tensile residual stresses, were observed for all the ground specimens but not on the as-delivered surfaces. Loading transverse to the rolling direction of the material increased the susceptibility to chloride induced SCC. Grinding induced tensile residual stresses and micro-notches in the as-ground surface topography were also detrimental.

    Download full text (pdf)
    fulltext
  • 416.
    Zhou, Nian
    et al.
    Dalarna University, School of Technology and Business Studies, Materials Technology.
    Peng, R. L.
    Pettersson, R.
    Surface integrity of 2304 duplex stainless steel after different grinding operations2016In: Journal of Materials Processing Technology, ISSN 0924-0136, E-ISSN 1873-4774, Vol. 229, p. 294-304Article in journal (Refereed)
    Abstract [en]

    Surface integrity has significant effect on service performance of a component. In this study, the evolution of the surface and sub-surface changes induced by grinding duplex stainless steel (DSS) 2304 was studied with regard to the residual stress, the microstructure, surface roughness and surface defects. The results provide insights into the effect of abrasive grit size, grinding force and lubrication on the surface integrity. The abrasive grit size was found to have the largest influence. Surface defects, a highly deformed surface layer and the generation of tensile residual stresses along the grinding direction have been found to be the main types of damage induced by the grinding operation. Residual stresses induced by mechanical effects dominate over thermal effects in this study. The results obtained can be used to understand the contribution of surface condition and residual stress on failure of duplex stainless steels in service by fatigue or stress corrosion cracking.

  • 417.
    Zhou, Nian
    et al.
    Dalarna University, School of Technology and Business Studies, Materials Technology. KTH.
    Pettersson, R.
    Schönning, M.
    Peng, R. L.
    Influence of surface grinding on corrosion behavior of ferritic stainless steels in boiling magnesium chloride solution2018In: Materials and corrosion - Werkstoffe und Korrosion, ISSN 0947-5117, E-ISSN 1521-4176, Vol. 69, no 11, p. 1560-1571Article in journal (Refereed)
    Abstract [en]

    The influence of grinding operations on surface properties and corrosion behavior of a ferritic stainless steel (FSS), EN 1.4509, has been investigated and limited comparisons also made to the grade EN 1.4622. Surface grinding was performed along the rolling direction of the material. Corrosion tests were conducted in boiling magnesium chloride solution according to ASTM G36; specimens were exposed both without external loading and under four‐point bend loading. The surface topography and cross‐section microstructure before and after exposure were investigated, and residual stresses were measured on selected specimens before and after corrosion tests using X‐ray diffraction. In addition, in situ surface stress measurements were performed to evaluate the actual surface stresses of specimens subject to four‐point bend loading according to ASTM G39. Micro‐pits showing branched morphology initiated from the highly deformed ground surface layer which contained fragmented grains, were observed for all the ground specimens but not those in the as‐delivered condition. Grain boundaries under the surface layer appeared to hinder the corrosion process. No macro‐cracking was found on any specimen after exposure even at high calculated applied loads.

  • 418.
    Zhou, Nian
    et al.
    Dalarna University, School of Technology and Business Studies, Materials Technology. KTH.
    Pettersson, Rachel
    KTH; Jernkontoret.
    Peng, Ru Lin
    Linköping universitet.
    Schonning, Mikael
    Outokumpu Stainless AB, Avesta.
    Effect of surface grinding on chloride induced SCC of 304L2016In: Materials Science & Engineering: A, ISSN 0921-5093, E-ISSN 1873-4936, Vol. 658, p. 50-59Article in journal (Refereed)
    Abstract [en]

    The effect of surface grinding on the stress corrosion cracking (SCC) behavior of 304L austenitic stainless steel in boiling magnesium chloride has been investigated. SCC tests were conducted both without external loading and with varied levels of four-point bend loading for as-delivered material and for specimens which had been ground parallel or perpendicular to the loading direction. Residual stresses due to the grinding operation were measured using the X-ray diffraction technique. In addition, surface stress measurements under applied load were performed before exposure to evaluate the deviation between actual applied loading and calculated values according to ASTM G39. Micro-cracks initiated by a high level of tensile residual stress in the surface layer were observed for all the ground specimens but not those in the as-delivered condition. Grinding along the loading direction increased the susceptibility to chloride induced SCC; while grinding perpendicular to the loading direction improved SCC resistance. Surface tensile residual stresses were largely relieved after the initiation of cracks. (C) 2016 Elsevier B.V. All rights reserved.

  • 419.
    Ångström, Carl-Johan
    et al.
    Dalarna University, School of Technology and Business Studies, Materials Technology.
    Karlsson, Johan
    Dalarna University, School of Technology and Business Studies, Materials Technology.
    Studie av fasomvandlingar vid värmebehandling av bi-metallblad i kontinuerlig process2014Independent thesis Basic level (degree of Bachelor), 10 credits / 15 HE creditsStudent thesis
    Abstract [en]

    Håkansson Sågblad manufactures saw blades for metal cutting. The saw blades are of the bimetal type, which means they are build with one part of hot worked steel and one part of high speed steel. Håkansson have invested in a new production line for a quicker tempering, the line is still under optimization.

    The aim of this work is to determine phase transformations in the high speed steel in the tooth tip during heat treatment. There should also be a suggestion for adjusting temperatures and speed during tempering of the saw blades. To meet the aim some samples from both the old and the new producing line were made and studied, focusing on the high speed steel in the tooth tip. The samples was studied in microscope and the hardness tested. The samples showed a structure of martensite, rest austenite and carbides, in different fractions for different samples. Hardness varies from 920 to 970 HV, which was in the expected range. Samples from the new line showed a higher fraction of rest austenite than other samples. Rest austenite will increase the hardness in further tempering.

    Therefore temperature in tempering furnaces should be higher or the temperature in the preheating assembly should be higher. To avoid a high fraction of rest austenite in finished saw blades.

6789 401 - 419 of 419
CiteExportLink to result list
Permanent link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • chicago-author-date
  • chicago-note-bibliography
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf